The LHG, using advanced technology, provides extremely rapid engine warmup. The system quickly and efficiently brings an engine up to and maintains its proper operating temp, dramatically reducing idling warmup and cold run time. This results in improved fuel economy, reduced emissions, lower maintenance costs, and significantly reduced engine wear. As an added benefit, the system also provides extremely rapid window de-icing/defrosting during freezing temp operations. With an LHG installed, there's no more shivering and waiting 20 minutes for a rig to heat up. During testing in freezing conditions, an LHG-equipped 6.7L rig was blowing hot air into the cabin within a couple of short minutes and achieved full operating temp in less than 7. A stock rig in the same test took around 22 minutes! The difference is dramatic. With the average commute currently estimated at around 27 minutes, it's a significant revelation. In other words, on a typical 27-minute commute in freezing temps, a non-LHG rig is "running dirty" 81% of the time. That's exactly what leads to DPF clogging, regen cycles, more contaminants moving through the engine, and excessive engine wear. Running cold means damage. This is true regardless of whether the weather is cold outside or not. Running an engine below its ideal operating temp causes problems, especially on today's modern vehicles that are loaded down with failure-prone emissions equipment. The LHG is a 50-state LEGAL way to solve a legitimate problem. Unlike older attempts to address the issue that used flame, diesel fuel, or exhaust gasses to generate heat, the LHG uses coolant and the magic of fluid dynamics. It's serpentine belt driven and coolant is plumbed in and out of the unit. The LHG does its job from there. An advanced smart controller monitors conditions and ensures proper operating temp. is maintained. Consistently running an engine at its optimal temperature promotes far cleaner, more efficient combustion. (dramatically reduced DPM levels). The result? Dramatically fewer regen cycles and a dramatically extended lifespan for your Diesel Particulate Filter (DPF). The liquid heat generator (LHG) is capable. It instantly adds 8-16kW (27,000 - 55,000 BTU) of additional heat to your engine coolant circuit and heater core based on engine RPM. The system is fully automated and a smart control module engages and disengages the unit based on coolant temp, load, and operating conditions. It works when it needs to and shuts off when it doesn't. The controller even monitors vehicle usage. If the truck hasn't been run/driven for an extended period of time the smart controller will prompt the LHG to initiate a self-cleaning cycle. It's smart. These units perform better, have fewer maintenance needs, cost less, and are far easier to install than antiquated "burner" based solutions. Installation of an LHG can be completed in a couple of hours with a set of basic tools. To learn more about this product and how it can help you save money, protect your diesel engine, and extend the life of your emissions system check out our website www.usadiesel.com, or give us a call at 515-897-4459 Press Release Type: Product Company: USA Diesel Booth #: 11442 Show Categories: Power Sports & Utility Vehicles Trucks, SUV's & Off-Road Media Contact Name: Ed Stefan Media Contact Email: sales@ficmrepair.com Media Contact Phone: 5158974459 Photo Gallery: 102821