Olive Branch, MS – The new line of Edelbrock VRS-4150 Race and Performance Carburetors is packed with features that will appeal to racers, engine builders, and carb tuners, as well as hot street enthusiasts looking to improve performance. The VRS-4150 is street-friendly but race-ready. The one-piece, cast aluminum bodies fit all 4150 and 4500 carb flange manifolds without requiring an adapter plate and are available in 650, 750, 850, & 950 CFM models. A street throttle arm, Moly-coated throttle shafts, and built-in provisions for a standard GM three-wire TPS mount add features to this carburetor that are ideal for any user. Multiple vacuum hook-ups keep this carburetor usable on the street but still ready for the track with larger capacity fuel bowls and four circuit billet metering blocks with industry-standard screw-in emulsion bleeds. These features make for easy tuning and great versatility in many applications. The 20% larger capacity fuel bowls feature internal ribs to control fuel slosh, and a sculpted baffle directs incoming fuel to the sides to minimize bubbles. The floats have corner cuts to avoid shutting off the fuel flow during hard cornering, and jet extender notches and jet extenders in the rear to keep the jets covered in fuel under hard acceleration. With the new VRS series carburetors, users can externally adjust idle bypass air as the adjustment screws are accessible without removing the air cleaner/scoop. The advanced idle circuit features interchangeable idle discharge jets in all four corners to allow for a smooth, clean idle when using big, low-vacuum camshafts. Typically found only in high-end racing carbs, the VRS includes fully adjustable intermediate fuel circuits, which help to provide incredible throttle response. Finally, for greater control at high RPM, the high speed/main fuel circuit is split into two bleed circuits – one each for the lower and upper sections. As an additional feature, the power valves are located on both primaries and secondaries that support optimized jetting. The power valve will add fuel as necessary, while the power valve protection circuit prevents diaphragm damage from backfires. About Edelbrock For more information about Edelbrock and other Edelbrock Group™ companies, visit www.edelbrockgroup.com. Press Release Type: Product Company: Edelbrock Group Booth #: 22443 Show Categories: Racing & Performance Media Contact Name: Trent Goodwin Media Contact Email: tgoodwin@edelbrock.com Media Contact Phone: 901.375.3491 Photo Gallery: 102821