Bearing Issues Solved ! We took the Hydraulic throw out bearing to a new level. It's so Cherry, because we looked at installation, longevity and design and took it up a notch. Under-dash hydraulics owner Cherie Westrich was not looking to just have a bearing private labeled but to redesign and improve on everything out there using a manufacturer with a unmatched reputation & lifetime warranty. We solved the top issues we heard over the years and you will see the result is Cherry!! You won't find this on any other bearing. 1. Swivel line proprietary design, Both pressure and bleeder lines swivel to make installation much easier. 2. Bleeder line is located at 12 o'clock. This is an industry exclusive. Simple solution, air bubbles go up and at the 12 o'clock position bleeding is easier than ever before. 3. New, Chromate plated, Bearing shield for corrosion and longevity. This is an industry exclusive. 4. The cherry Bearing piston has .750 inches of available travel. Low profile to fit into the tight spaces Precision aligned for less clutch wear, low drag hydraulics guarantee complete clutch engagement. Manufactured from high strength, extruded aluminum Guaranteed for life never to break due to structural failure. Designed to withstand more than three times the normal operating pressure Your cherry bearing will show up to you pre-bled from the factory, pressure, tested twice the normal operating pressure 45 mm angular contact, flat faced bearing Packed with aerospace quality grease High quality, constant contact, railed, bearing for a long trouble free life. Available for a Chevy, Ford and Mopar cherry bearings Cherry bearings has cut no corners simply the best easiest to install & bleed on the market today. Press Release Type: Product Company: Under-Dash Hydraulics / Malwood USA Booth #: 23282 Show Categories: Hot Rod Alley Restoration Marketplace Media Contact Name: Cherielynn Westrich Media Contact Email: info@malwoodusa.com Media Contact Phone: 213-453-8256 Photo Gallery: 102821