Revolution™ tire changer introduces WalkAway™ capability reducing tire changing and balancing times by 25%+!

Share
Tagged under:

Revolution™ tire changer introduces WalkAway™ capability reducing tire changing and balancing times by 25%+!

The Revolution™ tire changer with WalkAway™ capability features 80-seconds of autonomous bead breaking and demounting that can be performed without an operator present. The Revolution™ allows the operator to “walk away” freeing them up to perform balancing procedures or other shop tasks during the longest portion of the tire changing action. WalkAway™ also reduces operator effort and potential errors. During WalkAway™ the operator simply loads and unloads the assembly, orients the TPMS, enables WalkAway™ then offloads the old tire.

WalkAway™ increases the automatic and autonomous operation of the Revolution™ tire changer to save technicians time, effort and mistakes. When paired with wheel balancing, over 25% time savings is possible.

Tire changing is an all-day task, not a race for single tires. Assembly after assembly, the partially autonomous Revolution™ outpaces conventional tire changing equipment and now WalkAway™ adds even more capacity. Most technicians mount and balance assemblys sequentially. First demounting and mounting all four tires, then balancing all four assemblies. The Revolution™ featuring WalkAway™ frees the operator to balance assemblies while the Revolution™ demounts the next tire – autonomously – saving time, adding capacity, and reducing the time technicians spend on each job.

Self-monitoring WalkAway™ can be easily set for tires two through four in a set. A status indicator lamp signals when the machine is in operation, stopped or requires operator intervention. The Revolution™ also features additional autonomous funtions such as WalkAway™ inflation and WalkAway™ bead massage.

The Revolution™ tire changer with WalkAway™ will be demonstrated alongside Hunter’s Road Force® Elite diagnostic wheel balaner at SEMA 2017 in booth #41029.

Hunter Engineering Company® is the global leader in wheel and tire service, alignment systems, brake service and inspection lane equipment. Hunter® equipment is approved and used by vehicle manufacturers, automobile and truck dealers, tire dealers and service facilities around the world.

For additional information, visit our website at www.hunter.com or contact Madeline Triplett, Advertising Development Manager, Hunter Engineering Company®, 314-716-0467. For more information, please contact your local Hunter® representative at www.hunter.com/demos.

AttachmentSize
tcr1x_walkaway.pdf392.94 KB