Trucks, SUV's & Off-Road

Heavy Duty Cover for the Ford 8.8 Super HD Differential

PML now manufacturers and sells an aftermarket heavy duty differential cover for the new Ford 8.8 inch ring gear Super Heavy Duty (HD) rear differential.

Ford introduced this differential on 2015 F-150 trucks as an improvement to the regular Ford 8.8 inch differential. PML responded quickly to the needs of the F-150 market and is the first to produce an aftermarket cover for this updated differential.

This new PML cover has been installed on 2015, 2016 and 2017 F-150 trucks. The PML cover aids in dissipating heat with:
• Cooling fins
• Aluminum construction
• Extra Capacity

The addition of a drain and magnetic drain plug simplifies fluid changes.

PML constructs the cover of sand cast aluminum so the walls and flange are thick, adding strength to the differential housing. The flange is machined flat for a leak-free seal.

AEM Series 3 Standalone ECU Platforms Available for Ford, GM & Mopar EFI & TBI V8s!

Want to run your engine on programmable EFI on a budget? Here’s your best choice!
State-of-the-art engine control for only $999.00

Hawthorne, CA— AEM has released the Infinity Series 3 Programmable ECU platform for popular early- and late-model throttle body and port injected Ford, GM and Mopar V8s. The new Series 3 ECUs are simplified engine controllers designed to run a race, marine or crate engine without the need for, or cost of, additional features like variable cam control, Drive-by-Wire throttle control or internal wideband air/fuel sensor controllers. Initial release of the Series 3 includes the Infinity 308 (PN 30-7113) and Infinity 358 (PN 30-7114). Both Infinity Series 3 systems are offered at a special introductory retail price of only $999.00. Once this promotional introductory price ends, The Infinity 308 will retail for $1,198.00 and the Infinity 358 will retail for $1,248.30.

INFINITY 308

Innovative Creations releases a pre-cut reverse light ready version of their Magnum Bumpers which fit a proprietary flush mount LED light designed in tandem with KC Hilites and sold separately at your authorized ICI dealer.

The new Magnum Series bumpers come pre-cut specifically to fit the proprietary LZR LED designed by KC Hilites in tandem ICI. Magnum Series Bumpers offer ultimate protection, simple installation and include shackle mounts for tow hooks or shackles. The bumpers come with ¼” steel internal brackets and a 1/8th cold rolled steel exterior shell. Magnum Series Bumpers also let you keep all your OE Safety Features including, reverse cameras, sensors & trailer plugs.

After researching the marketplace ICI was unable to find a suitable light to pair with the Magnum Bumpers, taking into consideration:
- Light Brightness
- Aesthetic look
- Visibility
- Functionality with OE Cameras and Sensors.

ICI and KC Hillites teamed up to design a flush mount reverse light that provides a perfectly lit rear-view without washing out reverse cameras or effecting reverse sensors.

Simple Install

AEM Introduces OBDII CAN bus Connectivity for CD-7 Digital Dash Display!

Hawthorne, CA— AEM’s CD-7 OBDII CAN Plug & Play Adapter Harness (PN 30-2217) connects to the factory OBDII port on 2008-up vehicles and sends available data channels to the CD-7/CD-7L (PN 30-5500/ PN 30-5501 logging) Digital Dash Display, making it the perfect racing display for track day enthusiasts who want to be able to see engine and vehicle data but are still running a factory ECU. When combined with the Vehicle Dynamics Module (PN 20-2206, sold separately) users can add GPS, a 3-axis accelerometer and 3-axis gyroscope for track mapping and lap times, and critical vehicle dynamics data including G-loads, roll, pitch and yaw. Existing CD-7 owners with a stock ECU who are already using the dash and receiving channels from a data logger or other CAN-enabled device can now add additional channels through the OBD connection on 08-up vehicles using this plug & play harness!

Electra Meccanica Shows Off SOLO at 2017 SEMA Show - All-electric, single-passenger vehicle to transform daily commuting

Electra Meccanica Vehicles Corporation (EMV) will show off its new 2017 SOLO electric vehicle (EV) at the Specialty Equipment Manufacturer Association’s (SEMA) show being held in Las Vegas from October 31 through November 3, 2017. After years of development, this one-person, innovative commuter vehicle is now available for the American viewing public to experience following its world debut in Vancouver last year. Fully-refundable deposits for the SOLO can be placed online at electrameccanica.com.

“The entire team here at Electra Meccanica is excited to unveil the SOLO at the SEMA show,” states Jerry Kroll, CEO of Electra Meccanica. “We encourage enthusiasts as well as any specialty equipment manufacturers to come over to our booth #50842 at the show and see this amazingly transformative commuter vehicle.”

Bollinger Motors Brings the World’s First All-Electric Sport Utility Truck to SEMA

The Classic Car Club of Manhattan hosted the world premiere of the new Bollinger B1 on July 27, 2017
The Bollinger B1 is a no nonsense back-to-basics all-electric sport utility truck (SUT) with exceptional off road capability
The world's first all-electric, all-wheel drive, off/ on road sport utility truck
This environmentally-friendly project is a showcase for American ingenuity and a model for clean energy enterprise and innovation designed, engineered and manufactured in the US
For full product information, click here for images and technical specifications: http://bollingermototrs.com/pressroom

Bollinger Motors is showing off the all-electric B1 sport utility truck to the attendees at the Specialty Equipment and Manufacturing Association during their annual show in Las Vegas from October 31 through November 3, 2017.

Hard Korr® Lighting, all the way from down under

Hard Korr® Lighting manufacture and supply LED Lighting for the retail light industry. Hard Korr® product range covers Automotive, 4x4, Truck, Marine, Machinery, RV and Camping Industries. Hard Korr® also supply the manufacturing industry who are constantly looking for new and innovative products and companies that are willing to support them to help manufacture top of the line products.

Hard Korr® Lighting prides itself on delivering the highest quality products delivering great customer service, support and product. Hard Korr® Lighting are pioneers in the LED lighting and portable solar power industry in Australia. We design, manufacture and supply a range of products that are unrivaled in quality, durability and value for money in the Australian market. We are at the forefront of technology, continually refining and adding to our range.

Do-It-Yourself Engine Coating Kit Brings Ceramic Coatings to the Masses

Now anyone can coat Pistons, Bearings, Valves, Valve Springs, Cylinder Walls and more.

Ceramic coatings continue to be the best way to manage heat, reduce friction, increase power and extend part life. These cutting-edge coatings have only been available to professionals…until now.

These are the same coatings used by manufacturers, coating facilities, and race teams. Water-based coatings contain no hazardous solvents, no VOCs. Save time and money by applying performance coatings in your shop or at home.

The Engine Coating Kit contains:
CBC-1 Thermal Barrier Coating for piston tops, valve face, cylinder head, combustion chamber;
DFL-1 Dry Film Lubricant Coating for piston skirts, valve stems, valve springs, main/rod bearings, cams, gears;
PKSX Dry Powder Lubricant for cylinder walls, lifter bores and valve guides;
UltraGel Assembly Lubricant (used by top fuel teams) for cam, lifters, gears and more.

Skull Krushers Offroad, Inc. Partners with All American Off Road to Become a Licensed Dealer and Product Representative

BAYTOWN, Texas) August 21, 2017 – SKULL KRUSHERS OFFROAD, INC. announces that they have partnered with All American Off Road to sell their products through the Skull Krushers website. Skull Krushers has also agreed to be corporate representative for various All American Off Road products. In an effort to continually grow product offerings, Skull Krushers has the ambition to become a premier one-stop shop for all Jeep customization needs.

“We are extremely excited about our partnership with All American Off Road,” said Skull Krushers’ CEO Ben Port. “Their company represents everything that we do here at Skull Krushers. They make quality Jeep accessories right here in the U.S.A., and we’re happy to rep their products and add their brand to our product offerings.”

New Dodge 6.7L Cummins Intercooler Kit, 2013+

The Dodge Cummins straight-six is well known for its smooth power delivery and engine longevity. Mishimoto has released an intercooler for the 2013+ 6.7L Cummins that is built to last, just like your truck. The Mishimoto Cummins intercooler is manufactured with robust cast aluminum end tanks and a dense bar-and-plate core. Our engineers developed an intercooler with increased core volume that can support substantial boost pressures in your stock or modified truck.

Syndicate content