Tools & Equipment

Milwaukee’s New M12 FUEL™ Right Angle Die Grinders are More Powerful than Pneumatic!

Tagged under:

MILWAUKEE, WI- By harnessing the portable productivity, performance and run-time that they can deliver through M12 FUEL™ technology*, Milwaukee introduces the M12 FUEL™ 1/4" Right Angle Die Grinder. The first cordless right angle die grinder that delivers the size and performance professional service mechanics demand, this new tool offers up to 0.3 HP performance, 4-Mode RPM control, and the mobility to fit in the tightest spaces.
As with all M12 FUEL™ products, the new tool features three Milwaukee®-exclusive innovations — the POWERSTATE™ Brushless Motor, REDLITHIUM™ Battery Pack and REDLINK PLUS™ Intelligence Hardware and Software— to provide users with the ability to remove material faster, and with more power, than pneumatic.

Griot’s Garage G9 Random Orbital Polisher

The G9’s comfort is second to none. You can feel its lightness and balance the first time you pick it up. Griot’s Garage designed the G9 with perfectly placed grips, high-quality double-shot rubber touch points, and easy to engage controls that are convenient for right- and left-handed users. They’ve upped the power ante to 1,000 watts, a 17% increase over their previous 6” Random Orbital. Just like on the street, performance is all about putting the power down. So Griot’s Garage made the G9’s drivetrain 45% stronger than their Gen3 machine and added a state-of-the-art Constant Speed Controller. The controller maintains the set speed even when additional pressure is applied to the tool, ensuring the G9 makes the most of every 9mm pad rotation. Representing the fourth generation of improvements to the Griot’s Garage line of Random Orbitals, the innovative, feature-rich G9 is the new benchmark of random orbital design.

Boost Shop Capacity and Energy Savings with New Ingersoll Rand® Compressed Air Solutions

Tagged under:

FOR IMMEDIATE RELEASE

Industrial-grade equipment now available for light commercial operations with the new Next Generation R-Series compressor models

DAVIDSON, N.C., Sept. 10, 2019 — Manufacturers require quality air compressors to maintain throughput and achieve energy efficiency goals. Now, light commercial businesses can reap the benefits of industrial-grade equipment with two new Ingersoll Rand® Next Generation R-Series compressors.

TuxMat Announces The Honda S2000 Project

TuxMat Inc. announces new custom fit floor mats for the Honda S2000 in the teaser clip they released on their youtube channel. The S2000 celebrates its 20th birthday this year, and 2019 also marks a decade since Honda halted the iconic sports car’s production.

The sheer significance of the Honda S2000 in the car enthusiast community can be proven by a quick Google search to see an abundance of recent articles and videos in memoriam of the car. The S2K was, and is, one of the internet’s most beloved sports cars since its release in 1999, and its popularity hasn’t lost momentum. There is an enduring phenomenon that surrounds it, which can be seen in the ever-increasing price that buyers are willing to pay to get their hands on a collectable like the S2000.

ORACLE Lighting Reveals Revolutionary Oculus Headlamp System

Oracle Lighting is excited to debut the Oculus Bi-LED Headlamp system for the 2018-2020 Jeep Wrangler JL and 2020 Jeep Gladiator JT models. Oracle's revolutionary lighting system features advanced LED projection with 3,200 lumens for enhanced driver visibility in all weather conditions. The Oculus LED light source also uses less power compared to the factory lamps while still providing more light output.

“The new Wrangler is one of the hottest vehicles currently available,” says Oracle Lighting Director of Product Development Justin Hartenstein. “Unfortunately, the factory JL and Gladiator headlamps present compromises: the base-model halogens don’t emit adequate light in our opinion, and the optional LEDs are an expensive upgrade. We created the Oculus Bi-LED to give owners of new Jeeps more focused lighting that significantly exceeds the factory light output, all at an affordable price.”

ColorBond CLeo Award Presentation!

Media, PA, September 5, 2019: It is time again for the annual ColorBond CLeo Award Presentation! The award recognizes individuals who have shown excellence utilizing ColorBond car interior paint to restore, or restyle, the interior of any type of automobile including, trucks, muscle cars, classics. Award recipients receive the CLeo Crystal trophy, $500 and have their vehicle showcased in the ColorBond booth at the SEMA Show. They’re also provided with a space in the SEMA organized 100-car parade down the Las Vegas Strip!

The CLeo was established in 2014 to honor Mr. Leo Kagan who was responsible for moving the SEMA Show in 1977 from Anaheim, California to its current location in Las Vegas. Leo is 102 years old and continues to work for ColorBond Automotive Paint. Past CLeo Award winners are Ken Bolen, Jay Van Houten, Carlos Medrano and Eddie Black.

Introducing Hitch Tent(™) from Rubicon Expedition Products (REP)

Sacramento, CA, For Immediate Release - Rubicon Expedition Products is proud to unveil Hitch Tent™, a hitch-mounted platform designed to boost the convenience, versatility, and comfort of a rooftop tent system.

Remaining vertical during transport, Hitch Tent™ deploys to a horizontal position for use. Independently adjustable legs allow quick and easy leveling on uneven terrain. The rear mounted design frees up valuable roof space, dramatically reduces wind resistance and most importantly; provides a detachable basecamp for unrestricted adventure.

Fabricated from ultra-tough, hot rolled A36 steel and CNC machined 6061-T6 aluminum, the initial Hitch Tent™ model will accommodate most two and three-person, folding style, canvas rooftop tents. The platform easily mounts in a two-inch hitch via our Patent Pending RubiConX Hitch Hub.

LC Power Tools Names Robert Eichelberg Global Sales Director

LC Power Tools Names Robert Eichelberg Global Sales Director

(OCONOMOWOC, WI, September 3, 2019) – LC Power Tools announces the appointment of Robert Eichelberg as Global Sales Director. In his new role, Bob will oversee sales and marketing for the professional power tool manufacturer, beginning with the launch of UDOS, the world’s first 5-in-1 professional polisher for the detailing market.

Bob has more than 40 years of experience in the power tool market, most recently serving as President of Flex North America, a position he held from 2001 to 2019. His prior experience includes work for Black & Decker/DeWalt, Skil and Porter Cable power tool brands.

DS18 Big Bad Wolf 2015 Jeep

Rob Ferro's (MR DS18) 2015 is a sight to see! This Jeep has been nicknamed "The Big Bad Wolf" by the DS18 staff and Jeep community. It is very well known on the social media and show circuit featuring all DS18 equipment and very unique fabrications. We will be debuting the new DS18 J-LOUD and the new DS18 Jeep box that fits two 12 inch subs firing down with custom plexiglass cuts to show the beauty of DS18 subwoofer motors. Powered by our EXL and FRX series of amps, this Big Bad Wolf hosts plenty of power to power all the amazing DS18 sound components and LEDs this crawler has. Charging all these pieces of loudness and light is the DS18 LTI40ah lithium battery. This battery can be used in large systems demanding up to 12,000 watts clamped! Also inside will be a rocking DS18 JK Sound bar housing four 8 inch mids, four super tweeters, and 2 ear piercing drivers all wrapped in RGB lighting!

Prototyping and Mold Making Tool: MAKEiT 2x4 Large Format 3D Printer, US Quality at Affordable Price

Innovative 3D Printer Prints Large Parts

Made in California, MAKEiT 2x4 is the well-built large format 3D printer designed to meet auto industry’s needs. With a massive, heated rectangular printing area of 55x24x31in (4.6x2x2.6ft, or 1400x610x800mm), 3D printing large part in one single piece can be achieved affordably.

Parts like door panels, fenders, grills, hoods, bumpers, spoiler, splitters and more can be 3D printed on MAKRO2x4 in hours or days.

MAKEiT 2x4 large format 3D printer works with different types of building materials. It prints not only regular PLA, PETG, but also works with industrial grade specialties, such as PETG with carbon fiber fill, Nylon, Nylon with carbon fiber fill, Nylon with glass fiber fill, TPU, etc. MAKEiT 2x4 printer is on wheels, making it much more portable than most 3D printers. Processes such as material feeding/removing and bed calibration are automated.

Syndicate content