- Contact Us
Kleinn Air Horns – the leader in air horns and onboard air systems is proud to introduce another direct-drive horn to its lineup called Marine One™. This new dual horn is constructed completely of stainless steel, so it’s perfect for salt & fresh water applications - or any 12-volt application where you aren’t able to, or do not wish to install a separate air compressor and tank. The direct drive compressor for each horn is sealed, and self-contained in each horn base. Marine One produces a combined 330Hz & 406Hz tone at 118 dB. All you’ll need to install it is wire and a momentary button to provide power. The unit comes complete with mounting hardware, a heavy duty stainless steel support bracket and instructions. Available fourth quarter 2015 from Distributors nationwide. For more information, please contact Kleinn Air Horns, 4045 N Highway Dr., Tucson, AZ 85705 or visit us online at www.kleinn.com.
Kleinn Air Horns’ 6354 Sealed Air System is the fastest complete, high pressure & high performance 24-volt air systems on the market. Intended for mobile pneumatic applications, this ground-breaking system features a 100% duty cycle, 24-volt air compressor that provides 150 PSI and creates 1.98 CFM at 0 PSI. This high performance 24-volt air system features a 3 gallon US Made air tank and everything you’ll need to provide plenty of flow at 150 PSI for most mobile applications. The system also includes all fittings, necessary parts and detailed installation instructions – all in one box. A 30-foot coil hose with deluxe carry bag is also standard and comes with everything needed to turn the system into a mobile tire fill station. For more information, please call (520) 579-1531, contact Kleinn Air Horns, 4045 N Highway Dr., Tucson, AZ 85705 or visit us online at www.kleinn.com.
Similar to OE Replacement Rbber Mat for 1988-1997 Chevrolet and GMC Std. cab pick up 1500, 2500, 3500
Newark Auto is pleased to once again be able to offer the full floor Replacement Rubber Mat for the 1988-1997 Chevrolet/GMC Pick up standard cab 1500, 2500 and 3500 models. The mat has similar to OE texture, covers the full floor and includes padding with the mat. Available for shipment Fall 2015.
MAKE PLANS NOW TO VISIT COVERCRAFT DURING THE 2015 SEMA SHOW
New Products, Impressive Feature Vehicles and More – Booth 23243
Pauls Valley, Okla. – July 30, 2015 – As part of the company’s 50th anniversary celebration, Covercraft is making plans for an exciting presence at the 2015 SEMA Show. The company will return to Central Hall in the Las Vegas Convention Center located at booth number 23243.
New Products and More
What could an industry changing manufacturer of climate control systems that provides ultimate style and killer performance and the leader in custom car building have in common?
Aside of refusing to conform to industry standards, the Restomod Air ® brand and Counts Kustoms, a one of a kind hot rod and chopper builder have transformed the way custom car builders address the issues of adding Air Conditioning to their builds. Restomod Air will forever change the way the world builds custom cars using Air Conditioning, while Counts Kustoms transformed the way the world views custom car builds with unique style and a nod to the retro.
Now, the two companies are working together to tackle new customization challenges. Today, at Counts Kustoms, Las Vegas named the Restomod Air® brand its official A/C Provider for all their custom car/hot rod A/C needs.
Diesel engines (even stock) produce high temperatures and pressures. OEM up pipes eventually fail from constant temperature and pressure fluctuation.
PPE has taken the OEM replacement to a new level. PPE OEM Up-Pipes allow 53% greater flow over stock. PPE OEM Up-Pipes are a direct bolt-on to your factory manifolds. But unlike factory parts, PPE OEM Up-Pipes are manufactured from 11 gauge 304 stainless steel and include our superior PPE 304 stainless steel, internally-sleeved bellows that can take the abuse of high temperature and high pressure.
OEM length, left and right 304 stainless steel Up-Pipes, non-EGR, Race-Only.
▪ Significant reduction in exhaust back pressure
▪ Free-flowing stainless steel inner liner bellows
▪ Stainless steel 11-gauge .120-inch wall, 2-inch OD Up-Pipes
▪ Direct bolt-on replacement to factory manifolds
▪ Faster turbo response
▪ Lower exhaust temperatures
COVERCRAFT COVERS PROTECT RARE VAULT VEHICLES DURING PETERSEN MUSEUM RENOVATION
Pauls Valley, Okla. – July 30, 2015 – Before the historic Petersen Museum Vault was closed to facilitate the museum’s historic renovation project, the Executive Director turned to Covercraft Industries for custom-fit vehicle covers. Covercraft, the pioneer in car covers, partnered with Kimberly-Clark® to donate more than 100 custom made covers for the Vault’s world-renowned vehicle collection.
“We worked directly with Kimberly-Clark® on this project,” stated Marty Lichtmann. “The Block-it® Dustop® fabric was selected because it’s the thickest, most dust-resistant and softest material we offer for interior vehicle protection.”
To ensure a custom fit for each vehicle, the covers were made only after identifying the vehicles in the collection. Covercraft staff invested nearly a year making personal visits to the Vault to measure each vehicle on the list.
Attention Lovers of All Things Performance and Aftermarket: YOUR Social Media Site Has Arrived: Boltups.com Delivers the First Social Media Platform Designed Explicitly For Motor and Vehicle Enthusiasts
Santee, Calif., July 29, 2015 – Gearheads, car lovers, vehicle geeks and performance and aftermarket enthusiasts! There is a new social media destination for people exactly like you: Boltups.com.
Boltups.com is the social media platform for like-minded motor aficionados and the parts and accessories makers that bring their vehicles and vessels to life.
The Pinterest-style site allows powersport fans to connect with one another and professionals in the industry, promoting online social collaboration and enhancing aftermarket industry commerce.
“With millions of motorsport enthusiasts throughout the U.S., we recognized that there was no comprehensive social sharing website for this industry,” says Tony Bilancia, spokesperson for Bolt Ups, LLC. “Our goal is to build a wide-ranging online community where aftermarket and performance lifestyle fans can interact with other users and share their own content.”
Much More Than Pictures
Steele Rubber Products is excited to be gearing up for this year’s SEMA Show. Steele has been working hard for over 50 years designing and manufacturing weatherstripping and other rubber parts for classic and antique American cars, trucks, and hot rods. They have a team devoted to researching and developing new parts and are always working with customers to develop custom pieces. All of their parts are designed from original pieces for a factory look and superior performance. They are a proud American manufacturer with their facility located in Denver, North Carolina.
The goal for Steele Rubber Products is to help their customers restore the car of their dreams. This year at SEMA they will be showcasing new products, hosting celebrity Dennis Gage, and so much more. Make sure you stop by and see them at Booth 22885 in Hot Rod Alley and ask them how they can help YOU restore the car of YOUR dreams.
Luma III, Inc.
July 27, 2015 Wichita, KS – Luma III, Inc. announces that they will be entering a new product in the SEMA Show 2015 New Product Showcase in the following categories: Collision Repair & Refinish, Tools & Equipment Product, and Engineered New Product.
Luma III will announce the new product, specifications, and launch date as SEMA Show 2015 approaches. Kirk Lucas, CEO, states “Luma III’s Aurora was a game changer for the refinishing industry; however, our excitement grows as we constantly innovate, improve, and continue to work towards helping great painters become even better painters”.