- Contact Us
Power Sports & Utility Vehicles
Meet the guys from Welderup! The shop from Discovery Channels "Vegas Rat Rods". They will be hanging out in the E-Stopp Booth 31273 on November 4th starting at 11am in Upper South Hall.
Meet UFC Bantamweight Champion TJ Dillashaw in the E-Stopp Booth 31273 November 6th at 11am. The E-Stopp booth is the place to "park it" in upper south hall. There will be a photo wall for pictures to be taken and lounge seating to rest from walking the show.
For Immediate Release: 9/15/2014
Rocker Arm Rebates are Back!
We have been listening to your needs and we are in the development stages of a new coil kit fitted for the 2014 Dodge Ram 2500. This kit will be a heavy duty variable rate rear coil kit designed for the 2014 Dodge Ram 2500. Our aim is to have this kit fully tested and in production for the SEMA 2014 Show or sooner. Stay tuned for further news about this exciting product.
PRE-ORDER YOUR KIT TODAY
Toll Free: 1-800-667-6167 Email: contact@TUFTRUCK.com
TUFTRUCK® Coils offers Super Heavy Duty Coil Spring Upgrades for common Ford, Dodge, and Chevrolet/GM trucks and vans. Our springs increase the load carrying capacity of your truck and fix vehicles with saggy suspension caused by heavy loads. TUFTRUCK® Coils are an ideal upgrade for working trucks and vans as well as personal vehicles.
West Coast Winch is proud to be attending the 2014 SEMA Show. The West Coast winch is unmatched in the market as this Honda Powered Equipment removes the need for electricity or hydraulics to power the pull. These winches run on 4-Stroke Honda engines and weigh as light as 20 pounds allowing as much as 2200 lbs. of pull in the most remote of locations. Where there’s a Winch there’s a way! Check out our website at www.westcoastwinch.com or call us at 1.888.794.8357.
We are pleased to be showing 2 of our most popular models at this year’s SEMA show:
PCW3000 – Gas Powered Winch
FOR IMMEDIATE RELEASE
Straight Fiber Now Available in 3M™ Wrap Film Series 1080
A total of 57 finish, texture and color options help make customer vehicles distinctive
ST. PAUL, Minn. – (July 7, 2014) – 3M Commercial Solutions is giving it to you straight-up with
the addition of two new straight fibers to 3M™ Wrap Film Series 1080, bringing users an even
greater number of out of the ordinary finishes, textures and color options. These two new films
• 3M™ Wrap Film 1080-SF12 Straight Fiber Black
• 3M™ Wrap Film 1080-SF201 Straight Fiber Anthracite
With a selection of carbon fiber, brushed metal, matte, satin, gloss and now straight fiber options,
film series 1080 is available in 57 finishes, textures and colors. This variety allows graphics
installers and car owners the flexibility to easily create head-turning looks for their vehicles, making
them stand out in the crowd.
Auburn Gear First to Offer Aftermarket Alternative for Post-2010 Chrysler 9-1/4 ZF Limited-Slip Differential
Auburn’s new 9-1/4 limited-slip differential broadens consumer choice and delivers superior strength and performance for about 25 percent less than OE diff.
AUBURN, Ind. — Auburn Gear, Inc., a leading U.S.-based manufacturer of high-performance differentials, introduced its new aftermarket, limited-slip differential replacement for vehicles with the Chrysler 9-1/4 ZF rear axle built after 2010. Auburn’s new aftermarket 9-1/4 differential is the first to market and is designed for easy installation and higher performance than the original equipment.
Until now, those wanting a limited-slip differential on certain Dodge, Jeep and RAM vehicles made after 2010 had to either specify it as an option in place of the standard Chrysler 9-1/4 ZF open differential or pay to have an OE 9-1/4 ZF limited-slip retrofit performed. Cost was often a barrier, and the OE-made posi-track was the only aftermarket option available.
Titan’s Rear After-Axle Fuel Tank Keeps Cab & Chassis Trucks in Service by Solving Delamination Problems
Titan’s new 40-gallon rear-after-axle polyethylene tank is impervious to corrosive diesel fuels and helps fleets save on maintenance, while extending the service life of Ford F-350, F-450 and F-550 trucks.
IDAHO FALLS, Idaho — Titan Fuel Tanks, the leading manufacturer of high-performance, engineered, polymer aftermarket fuel tanks, announced that it has started shipping its new 40-gallon 8020011, cross-linked polyethylene, rear-aft fuel tank. The polymer tank is the only one on the market engineered to fit 2011-2015 Ford F-350, F-450 and F-550 diesel cab and chassis trucks.
Titan’s new tank virtually eliminates the service and maintenance issues associated with diesel fuel line contamination originating in OE and aftermarket steel fuel tanks. The tank was met with widespread fleet interest during its first public display on June 8, at the Equipment Fleet Management 2014 National Conference and Trade Show in Lake Buena Vista, Fla.
VISION ENGRAVING & ROUTING SYSTEMS PRESENTS THEIR HIGH SPEED SPINDLE
Phoenix, AZ) – Vision Engraving & Routing Systems, is pleased to introduce their High Speed Spindle using an unprecedented 50,000 RPM ability, cuts through metals like a knife cuts through butter. The High Speed Spindle takes advantage of its low maintenance and world class bearing capabilities. Strap one of these on your vision cnc machine and see its ease of use and time saving aptitude. The Spindle can be used in tandem with Vision’s Misting System, creating a perfect combination for cutting, milling and boring aluminum, cast steel, stainless steel and many more metal projects.
Endeavor® is a new creative way of transforming any standard motorcycle to a reverse trike style machine. This Patented, trademark and copyright protected design is the first of it's kind. This design has been proven on three working prototypes totaling over 96,000 miles. This kit is a universal fit style made possible by its patented Adapter Cradle® integral component structure. Exterior skins are easily replaceable for a literal infinite change of look. No special tools or skills required and there is no modification to the motorcycle so the kit can be installed and removed at any time. Installation may be by dealer, motorcycle shop, or end user thanks to its user friendly considerations.
–Norm Kokes CCO - inventor - IDO Endeavor®
Attached are photos of conversions to a 1985 Honda ST1100, 1999 Honda Valkyrie and a 2001 Honda Goldwing. Our kit is of a universal fit design which will fit any motorcycle from Harley, Honda, Indian, Victory etc.