- About the SEMA Show
- Buy a Booth
- Why Exhibit?
- New Products Showcase
- Travel and Lodging
- Exhibitor Summit
- Learn About Exhibiting
- Exhibitor Information
- How to Succeed at the SEMA Show
- International Resources
- Promote Your Booth
- Exhibitor Manual
- Exhibitor List/Floorplan
- Submit a Press Release
- Feature Vehicles
- Show Directory Listing Update Instructions
- Key Show Contacts
- Contact Us
Wheels & Accessories
Hopkinsville, Kentucky U.S.A. October 23, 2013—
Bed Wood and Parts, LLC, the #1 source of show quality, custom manufactured, wooden truck bed parts and accessories joined forces with Direct Communication Inc. to enhance customer service.
Communications technology continues to improve and Bed Wood and Parts has partnered with DCi to distribute electronic catalogs and parts data to customers with all the obvious advantages that partnering with a first rate professional organization brings to the table.
According to President and CEO Jeff Major, “It’s an easy decision to choose DCi for your critical data requirements, as 110,000 customers can’t be wrong and their Midwestern location makes face to face contact convenient.”
To get the full story, check in to booth # 23186 in the Central Hall of the Las Vegas Convention Center and see how Bed Wood and Parts can serve you wood accessory needs.
About BedWood and Parts LLC:
Don’t miss the incredible mPower JUMP and JUMP IT, Peace of mind that fits in your glove box, SEMA Booth number 50213
mPower Technologies Inc. (http://mpowertech.com/) will be showcasing two new jump starter products at SEMA in Las Vegas, November, 2013. The mPower JUMP and the mPower JUMP IT are extremely portable car battery jump starters that fit in a glove box. mPower representatives will be displaying the power and portability of the mPower JUMP and JUMP IT and will meet with potential distribution partners at the show.
The mPower JUMP and JUMP IT will be showcased exclusively at the mPower Technologies booth (number 50213) located in the “First Time Featured Exhibitors” Bridge Booths section.
Magic Tank® Emergency Fuel Provides Insurance Against the Unexpected for Any Gasoline-powered Engines
Fuel substitute works like regular gasoline and is approved by NFPA, DOT and EPA.
NEW YORK, Oct. 23, 2013 /PRNewswire/ -- Running out of gas on a deserted highway is the stuff of horror films, but a new product promises to help consumers avoid that scenario. Magic Tank® is an emergency gasoline substitute that's safe to store and transport anywhere, and it works in any gasoline-powered combustion engine. This remarkable fuel substitute is currently available in half-gallon bottles: http://www.mymagictank.com/shop/. With firm patent protection in place, consumers can trust that Magic Tank® is the only product of its kind.
Hankook Tire Announces Plans for 2013 SEMA Show
Launching four new tires, showcasing latest innovation and a concept tire, highlighting motorsports activities, and engaging attendees at booth #43101
Wayne, NJ – October 23, 2013 – Building off the momentum gained from its successful year, including recently announced plans to construct a state-of-the-art manufacturing facility in Clarksville, Tennessee, Hankook Tire America Corp. sprints into the 2013 SEMA Show in Las Vegas from November 5 – November 8, 2013.
30-gallon polyethylene tank fits into the existing spare tire cavity of virtually all American-made pickup trucks, doubling fuel capacity without encroaching on bed space.
IDAHO FALLS, Idaho, (Oct. 22, 2013)—Titan Fuel Tanks, a leading manufacturer of high-performance, engineered aftermarket fuel tanks, announced that it will introduce its new cross-linked polyethylene, Spare Tire Auxiliary Fuel System at the 2013 SEMA Show in Las Vegas, Nevada. The innovative 30-gallon tank and fuel transfer control unit have a patent pending and will be shown to the industry for the first time in Titan’s booth 35111 in the Upper South Hall of the Las Vegas Convention Center.
Cloud-Rider Announces SEMA Show Specials *** GM Licensed Products***Advantage Tow Flap Booking***Brand New Fusion Long Flap***
Cloud-Rider Designs announces their SEMA 2013 Show Specials.
20% off any GM Licensed products ordered at the show.
10% off any GM Licensed products order after the show & before December 31, 2013.
5% off Advantage SS Tow Flaps ordered before December 31, 2013 for shipping Spring 2014.
10% off **THE NEW** Fusion Bond Long Flaps when ordering 10 pair before December 31, 2013.
Bring your GM Licensed order to the SHOW!!
Check out all of our products at
Follow us on facebook
Auburn Gear Engineers New, Super-Reliable Electronic Open-to-Lock Differential for Dana 60 Front and Rear Axles
Superior strength, dependable electronic operation and exceptional torque transmission characteristics make Auburn’s new Dana 60 differential an intelligent choice.
AUBURN, Ind., (Oct. 22, 2013)—Auburn Gear, Inc., a leading U.S.–based manufacturer of high-performance differentials, revealed that it will present its new patent-pending electronic open-to-lock differential at the 2013 SEMA Show in Las Vegas. The new differentials’ case strength and unique gear geometry will make it the toughest and most efficient aftermarket diff on the market. Dependable electronic operation allows the driver to conveniently transition from an open to a locked differential mode as the need arises, all without leaving the driver’s seat.
B&W Trailer Hitches Boosts Load Capacity of Whisper-Quiet Companion Fifth Wheel Hitch to 20,000 Pounds
New Companion hitch meets consumer preferences for heavier RV payloads and
accommodates changing truck beds while keeping its convenient, single-point attachment design
and smooth, quiet ride.
HUMBOLDT, Kan., Oct. 15, 2013—B&W Trailer Hitches, a leading U.S.-based manufacturer of heavy-duty, engineered trailer hitches and aftermarket truck/trailer accessories, introduced its new RVB3500 Companion fifth wheel aftermarket trailer hitch today. The new Companion hitch employs B&W’s unique Turnoverball mounting design that promotes quick, single-point hitch installation. The quiet riding hitch is designed to handle today’s heavier trailers and pickups with varying truck bed configurations.
MIAMI, Fla. – American Force Wheels will be arriving at SEMA in Las Vegas, Nov. 5 – 8, in full force with multiple booths and a variety of trucks showcasing the company’s popular and new wheel designs. American Force is in booth #47055, on the lower level of south hall, and also has two outside display areas in the parking lot in front of south hall (#63112 & #63218).
“We want attendees to get a feel for our industry-leading company and experience the creative designs and projects we’ve been working on. From our new 17- and 18-inch wheel sizes to our new, patent-pending face plate inserts, we’re expanding our product line to appeal to Jeep, SUV and half-ton truck owners,” said Ray Shadravan, president, American Force Wheels. “We’re highlighting our most stylish wheels, debuting new designs and allowing customers to see what our products would look like on their trucks and SUVs at SEMA.”
Announcing BILSTEIN Media Event at 2013 SEMA Show: Press conference on Wed., Nov. 6 at 1:30pm, Central Hall Feature Vehicle Area next to the Ford booth will include presentation of BMW 335i and introduction of new B16 iRideControl system
Poway, Calif. (October 16, 2013) – BILSTEIN, the leader in monotube gas pressure shock absorbers, is proud to announce an exciting event for the media and SEMA attendees on Wednesday, November 6 at 1:30pm at the SEMA Show in Las Vegas, Nevada. Located in the Featured Vehicle Area of the Central Hall in the Las Vegas Convention Center, the BILSTEIN press conference will include the presentation of the BMW 335i to the winner of their consumer sweepstakes and introduce the new smartphone adjustable B16 iRC suspension system. Look for the BMW on the ramp next to the Ford Motor Co. booth.
“We’re thrilled to present the customized BMW 335i to one of our lucky fans,” said Scott MacDonald, BILSTEIN director, marketing and product management. “We appreciate our loyal customers and this BMW is just one of the ways we can give back. The iRC system is a great new addition to our product line and we look forward to sharing its unique capabilities with the SEMA show crowd.”