Trucks, SUV's & Off-Road

Boom Mat Introduces XL Damping Material - Thicker Damping for Extreme Noise Control

Avon Lake, OH…Boom Mat, the automotive leader for acoustic control, now offers a new premium damping material that is 166% thicker than standard damping products. The XL version is an industry-leading 4mm thick. For unwanted noise in trucks, classics, street rods, modified street performance vehicles and stereo competition vehicles, Boom Mat’s XL is the most effective product for eliminating unwanted vibration, engine and road noise.

Constructed with a 4 mil aluminum panel-stiffening skin with an odorless, 4mm thick butyl noise constraining layer, Boom Mat XL traps unwanted noise while requiring less overall material to get the job done. With the thicker 4mm, only 25 to 50% coverage is required which reduces weight, installation time and material cost.

DEI Introduces New Larger ID Titanium™ Protect-A-Sleeve™

Avon Lake, OH…DEI’s Titanium™ Protect-A-Sleeve™ with LR Technology™ provides the best possible protection of wires, lines and cables of any sleeve available on the market. Design Engineering now offers this same Titanium sleeving in sizes large enough for radiator and heater hoses; providing the ultimate protection from heat and fluids.

Last year, DEI introduced the ½” ID Titanium Protect-A-Sleeve to fit larger diameter spark plug wires for added protection against extreme heat generated by hot exhaust manifolds and headers. Now, this same level of protection is available in new 1” and 2” IDs that will snugly fit most radiator and heater hoses. Four new part numbers are now available: 2” ID x 36” (#010482), 1” ID x 48” (#010483), as well as bulk lengths: 2” ID sold by the foot (#010482B) and 1” ID sold by the foot (#101483B).

WELD REKON XT B57B is a Stylish Bead-Loc Wheel Ideal for Off-Road Vehicles

Kansas City, Mo. – The WELD REKON XT B57B Bead-Loc is the lightest and toughest 17” off-road wheel on the market. The B57B’s one-piece forged construction provides high strength with no excess weight. It features a single outside functional black bead-loc on a 17x9 wheel, making it ideal for modern high performance off-road trucks, SUVs, and Jeeps. It includes WELD’s Advanced Tactical Coating (ACT), a proprietary nano-ceramic barrier to protect against mud, abrasions, salt, and corrosion. ATC protects the finish with no dulling or discoloration. Matching trailer wheels are available. WELD REKON XT wheels are designed, tested, and manufactured in the USA.

Grex Airbrush introduces their new fan spray cap accessory

Grex Airbrush announces a brand new fan spray cap accessory for their current line of Tritium and New Genesis Airbrushes. This transforms the standard round spray pattern of an airbrush into an elongated fan spray pattern of a spray gun. A very useful and desired trait for laying down even coverage with less passes. The Grex fan spray caps are available for the 0.3mm, 0.5mm & 0.7mm nozzle sizes. They will be sold individually or packaged along side a full nozzle kit. They add even further versatility to an already highly adaptable airbrush system. For more information, visit or call 888-4GREXCO (888-447-3926).

Design Engineering, Inc. (DEI) Celebrates 20th Year Anniversary: 1995 - 2015

Avon Lake, Ohio…Design Engineering, Inc. (DEI) is proud to announce the company’s 20th anniversary. Formed in 1995 by Dale and Nancy Markley, the company continues to expand and thrive under the leadership of their son, David Markley.

In the course of the past twenty years, DEI has designed and developed a multitude of new and innovative thermal protection materials and products. Now employing 30 at the company’s main headquarters in Avon Lake, OH, DEI has stayed true to the company’s original focus on developing the most advanced performance heat and sound control products while also introducing new brands including: Boom Mat™, DEI Powersports™, Ny-Trex™ nitrous oxide performance systems, Radiator Relief™ performance coolant additives and CryO2™ cryogenic intake systems. In 2003, Design Engineering was honored with the Best New Performance-Racing Product award from SEMA in recognition of the outstanding and innovative design achievement for the introduction of CryO2.

DEI Introduces Ultra Sheath MA™

Avon Lake, Ohio…Design Engineering’s new lightweight Ultra Sheath MA™ reflects direct and radiant heat that can damage underhood components, burn ignition wires and wiring or excessively heat brake and fuel lines. Designed as a replacement to aluminum or foil sleeving and to be the most advanced protection for cable lines, wire and hose, DEI’s Ultra Sheath sustains direct heat up to 1100°F and is over 40% lighter than foil covered sleeving.

More flexible to use than standard foil or bonded aluminum products, Ultra Sheath MA is easy to trim to desired lengths for quick and easy installation; even in hard to reach locations. Ultra Sheath MA can be purchased in multiple ID sizes and lengths as well as bulk including: ½” ID x 3’ (#010230), ½” ID x 15’ (#010231), ¾” ID x 3’ (#010232), and 1-¼” x 3’ (#010233).

Ny-Trex™ Introduces Remote Cord Push Button Switch

Avon Lake, OH…Ny-Trex™, the nitrous brand of Design Engineering, Inc. (DEI), now offers a Remote Cord Push Button Switch that works with any Ny-Trex nitrous system including: Bare Bones™, Triple Threat™, Big-Diesel™, or Prime Time™ purge kit. Developed for multiple applications, it also works with all of DEI’s CryO2 branded products—Purge Valve, Fuel Chiller or Intercooler Sprayer Kit. This versatile switch is universal in design allowing it to be used with most nitrous, purge or intercooler systems on the market today. As an auxiliary switch it can be used to replace any mounted push and hold activation button. DEI’s momentary Remote Cord Push Button Switch remains “open” until the button is depressed and held to activate.

Boom Mat Introduces New and Improved 2mm Damping Material

Avon Lake, OH…Boom Mat now offers a premium peel and stick 2mm automotive Damping Material that offers a more effective way to reduce unwanted vehicle interior noise. Boom Mat’s original damping material has been used for years to improve cabin acoustics. The new and improved 2mm damping material is designed to more effectively reduce low frequency noise typical of structure borne vibrations with less material coverage - reducing weight, material cost and installation time. Road, engine and vibration noise is reduced dramatically when applied to floorboards, firewalls, door skins and overhead interior roof panels.

DEI Introduces Fuel Injector Reflective Heat Covers

Avon Lake, Ohio…In hot temps, both performance and factory fuel injectors can be at risk of vapor lock or heat soak causing a rough idle, slow starting or other potential serious engine problems. DEI has the solution by introducing Fuel Injector Reflective Heat Covers available in packs of two, four, six or eight, that reflect direct and radiant heat away from the injectors.

Constructed of high-temperature rated glass fiber material bonded to a heat reflective aluminized material, DEI’s Fuel Injector Heat Covers can be used on most any engine configuration utilizing stock or aftermarket fuel injectors. Cooler fuel injectors will perform more efficiently, offering a more consistent throttle response.

Installation is a breeze as the injectors do not have to be removed. The covers are made with a split design allowing them to wrap around each individual injector and are secured with a sewn-in hook and loop fastening edge.

• Part# 010380 – 2 pack
• Part# 010381 – 4 pack

DEI Introduces Reflective Fuel Can Covers

DEI Reflective Fuel Can Covers are designed to keep race fuel cooler and denser for maximum power. Now available from DEI in three sizes – 5 gallon Round, 5 gallon Square jug and 54 gallon Drum. Introduced with a new design, these covers are the ideal solution to protect expensive race fuel. Many manufacturers recommend covering race fuels, especially the new generation of Oxygenated fuels to prevent exposure to the sun’s UV rays and heat. DEI’s reflective fuel can covers reflect heat away from the can, keeping temperatures stable and extending the life of the fuel.

For more information about DEI’s Made in the USA Reflective Fuel Can Covers in 5 gallon Round (part #010467), 5 gallon Square jug (part # 010471), or DEI’s 54 gallon Drum (part # 010848), designed with a sewn-in handle for quick removal, visit, call 800-264-9472, or visit DEI during SEMA at Booth #20013.

Syndicate content