Tools & Equipment

MINI-DUCTOR 2 GO WHERE NO TORCH HAS GONE BEFORE!

Induction Innovations has re-engineered their flameless torch into the NEW MINI-DUCTOR® 2 GO! Designed to be completely portable – works with a standard 12-volt battery pack, even runs off a car battery! Leave the generator behind and can take the MINI-DUCTOR 2 GO anywhere you need it – out in the field, across the lot or even out in space!

The MINI-DUCTOR® 2 GO heats ferrous metals without the danger of an open flame using invisible heat and turns a ¾” nut red hot in seconds. HUGE variety of heating applications for operating safer than a torch! Easily release seized nuts/bolts from corrosion or thread lock compounds. Remove/release; steering/suspension components, fuel tank straps, inline connectors, zirk fittings, manifold bolts, truck bed bolts, seat belt bolts, u-bolts, tie rod sleeves/ends, soft hail dents, metal fabrication, soldering, and even heat treating. Easily remove heavy undercoating’s applied over hardware.

Features:
• 12v Battery Operated

INDUCTION INNOVATIONS BRINGS INVISIBLE HEAT TO PAINTLESS DENT REPAIR

Induction Innovations has developed a NEW PDR attachment to complement its line of high performance induction heating tools. Unlike traditional PDR, the Invisible Heat® method is the cleanest and fastest way for fixing hail dents, door dings and other minor soft dents. There is no need to meticulously massage out from the backside of vehicle panels, especially in hard-to-reach areas, or areas difficult to get behind. Induction heating is the highest tech method for removing soft dents, the result is a clean dent repair in a fraction of the time compared to a conventional PDR tool.

The ergonomically designed INDUCTOR® PDR Baton is molded in high temp / impact resistant epoxy polymers for additional durability and versatility longevity. Tapered body and beveled edges on this attachment allows for balanced grip. The PDR Baton works in conjunction with either the INDUCTOR PRO-MAX or the INDUCTOR MAX power supplies

• 1 Year Warranty

NEW TECHNOLOGY DESIGNED INTO THE MINI-DUCTOR II +

The MINI-DUCTOR® II + is the #1 professionals choice hand held flameless torch! Induction Innovations engineered new technology and redesigned their 230V international version of the Mini-Ductor II! The MINI-DUCTOR II + integrates these new advances in technology for increased energy efficiency and ease of use. Leverage the power of technology with invisible heat to quickly release corroded or frozen hardware and other metallic components from corrosion and thread lock compounds. All WITHOUT the collateral damage associated with torches! Heats nuts red hot in seconds!

• NEW Cool-Touch Handle
• NEW technology inside – power where and when you need it
• Increased energy efficiency
• In-line design proven most effective in reaching difficult spots.
• Ergonomic balanced design reduces user fatigue
• Non-slip grenade handle
• Military grade virgin plastic for durability
• LED work light
• 1 year warranty
• NEW custom heavy duty blow-molded case with storage

HushMat Introduces Large Sheet & Mega Bulk Kits for International Distribution

Olathe, Kansas November 1, 2013 HushMat® – HushMat to offer larger sheets sizes through exclusive agreement with Rockford Corporation for International distribution.

HushMat has introduced new manufacturing technology to produce new/larger sheet sizes and will begin to offer 32” x 18” and 24” x 48” product with the worldwide leading brands of Rockford Corporation for international distribution. Rockford Corporation and HushMat, the fastest growing automotive sound deadening and thermal insulating materials company, continue to lead the worldwide mobile electronics industry establishing this exclusive agreement for Rockford’s international distributors and dealers to gain access to the profitable accessory products from HushMat.

Walcom Thermodry Technology Announces Exclusive Offer During SEMA

Walcom Thermodry Technology has announced an exciting offer exclusively available for SEMA attendees and members. Walcom is offering 0% interest for 12 months or 90 days deferred payment on equipment leases for the innovative TD3 Pro, TD3 and TD1 thermodry systems.

That means no money down until your second quarter, so you can utilize Walcom’s unique lean-processing technique to cut costs associated with escalating prices and EPA fees.

Walcom has a complete line of spray guns and air filtration systems backed by more than sixty years of experience. With newly-patented thermodry technology, auto body shops can expect to significantly improve the quality of their work and significantly cut down on drying time. Shops with Walcom Thermodry Technology installed can paint more cars each and every day and use less paint than ever before.

A Massachusetts repair shop owner said his drying time went from 45 minutes or more to 15 with the addition of Walcom.

Crank your stereo and lights all night long

SUMNER, Wash., — Torklift International released a product allowing customers to have spare battery power whether they want to run their speakers all night or they need to run their lights for some after hours work.
The HiddenPower is a battery mount that attaches underneath the truck body in order to house a spare battery. The battery is tied into the vehicle’s charging system to ensure the driver has a fully charged spare battery at all times.
“Auxiliary batteries were a huge add-on in truck accessory shops in the 60s, 70s and 80s back when it was easy to place an extra battery under the hood of your truck,” said Torklift International VP of Operations Jack Kay. “But as technology expanded for vehicles, more factory-installed products were placed under the hood of the truck resulting in less and less space. Now, there is no space under the hood. The space for the extra battery went away, but the need for the extra battery didn’t go away.”

Eastman to Debut Developments in LLumar® Advanced Technology Window Tint at 2013 SEMA Show in Las Vegas Installers Invited to take the LLumar® CTX® “Heat Shrink Challenge”

Eastman Chemical Company (NYSE:EMN) will showcase its LLumar® signal enabling window tint at the 2013 SEMA show (Nov. 5-8) in Las Vegas (Booth #12417). Window film and automotive dealers will have the opportunity to watch live installation demonstrations and gather tips from award-winning window film installer, Randy Humphries. Installers will have the chance to win a LLumar® PrecisionCut® System plotter and software subscription by participating in the “LLumar® Heat Shrink Challenge” raffle.

BILSTEIN’s New Interactive Shock Display Demonstrates New B16 iRC System with Smartphone Adjustable Active Suspension Control

BILSTEIN invites all 2013 SEMA Show attendees to visit their booth #23361 in the Central Hall of the Las Vegas Convention Center for a personal demonstration of their all-new B16 iRC suspension system. Using an interactive iPad display and state-of-the-art shock dynamometer, a BILSTEIN team member will illustrate the features and benefits of the technologically advanced smartphone adjustable suspension system.

Scheduled every 20 minutes during the show, the BILSTEIN representative will offer a hands-on demonstration of the iRC software that provides real-time suspension adjustments from the driver’s seat. The user-friendly design and functionality will be immediately evident as the demo takes the viewer through the graphic display and suspension settings available to BILSTEIN B16 RideControl customers who upgrade to the new iRC active suspension control system.

Who: Free to all SEMA Show attendees
What: Interactive product demonstration of new B16 iRC Suspension System

BEUMER to Preview Fully Automated Green Tire Handling System at SEMA

BEUMER’s Tire Tray System is designed to automate the gentle handling of tires using a minimum amount of contact points throughout every part of the production process

October 31, 2013 - Somerset, NJ (USA) (www.beumergroup.com)— BEUMER Corporation, a leading global supplier of automated material handling systems, will preview a new automated system, customized specifically for the tire production industry, at the SEMA show in booth #50109.

Zendex Tool Corporation, Manufacturer of GoJak®, Introduces New Products and Proven Ssolutions at SEMA

NEW GATOR™ POWER JAKS Lift Super Fast:
Gator flat-nosed, low-profile pneumatic jack is virtually maintenance-free and designed to last: its heavy-duty air spring can cycle thousands upon thousands of times to lift loads with just a touch of its advanced, feather valve. A mechanical gravity safety lock releases conveniently at the control valve. The main load wheels are solid machined steel with bronze, oil-impregnated bushings. Gator’s frame is made from heavy duty, all-welded steel plate. Super heavy-duty phenolic wheels, powder-coating, feather air control and certified over-pressure
valve provide long life and safe operation.

Gator is available in two models: Model 2117 starts in the lowered position from 2-3/4” to a raised height of 17” and lifts 2,100 lbs. Model 3621 starts from 3-3/4” to a raised height of 21” and lifts 3,600 lbs. Both units operate with pressure @ 110 psi.

NEW GOJAK® COMBINATION JACK/DOLLY MODELS with Greater Lifting Capacities:

Syndicate content