Restyling & Car Care Accessories

DEI’s Titanium Pipe Shield™ with LR Technology is Now Available in Two New Sizes: 4” Width in both 8” and 12” Lengths

Avon Lake, Ohio…When the ultimate in heat protection is required, DEI is the solutions provider. DEI’s Titanium Pipe Shield developed with evolutionary LR Technology provides maximum protection outperforming traditional Mylar-backed glass fiber shields.

Extreme direct or radiant heat can damage transmissions, brake lines, wiring and hoses. DEI’s Titanium Shield clamps directly to any size exhaust pipe – auto, marine or motorcycle, to provide spot protection of sensitive electrical components, lines, cables, wires, transmissions and fire walls. Only DEI’s Titanium Pipe Shield combines a unique riveted “stand-off” design using 3.5” stainless steel clamps that provide a cooling air gap between the shield and the pipe. Combined with the heat dissipation benefits of the 2 ply material made with LR Fiber Technology, this unique design and material combination provides heat protection up to 1350°F. Mylar covered shields begin to flake or crack at 900°F.

DEI Titanium Protect-A-Sleeve™ with LR Technology™

Avon Lake, OH…DEI’s new Titanium Protect-A-Sleeve™ with LR Technology™ offers the best possible sleeve protection on the market today. Developed specifically for any application where extreme high heat is present, these Titanium™ sleeves will protect wires, lines and cables when exposed up to 1800°F direct heat/2500°F radiant. Developed with DEI’s proprietary LR Technology, these high temperature rated sleeves provide superior thermal protection for street vehicles or race engines, protecting fuel, oil lines, spark plug and electrical wires from direct or under hood radiant heat. The ½” ID sleeves will fit many of today’s larger diameter spark plug wires for protection against hot exhaust manifolds and headers. Water and heat resistant, they are also ideal for Powersports – ATV/UTV, motorcycle, personal watercraft, snowmobiles, and marine use.

DEI Introduces Stainless Steel Positive Locking Ties™

Avon Lake,OH…DEI’s new Stainless Steel Positive Locking Ties are specially designed for any application where there is extreme high heat – street, race, marine and powersports. These low profile ties are ideal to secure exhaust wrap, such as DEI’s Titanium™ Exhaust Wrap for high HP or turbo charged vehicles.

Developed and tested to provide long term, durable use under severe heat in excess of 2500°F, they can be applied in a snap and will last for years. Made from high grade 316 stainless steel, DEI’s new Stainless Steel Positive Locking Ties offer exceptional tensile strength - up to 200 lbs. for the 7 mm wide ties, or 350 lbs. for the 12 mm size.

This new product is currently available in a wide variety of sizes and quantities including:

7mm x 9” eight pack, (Part# 010208) 7mm x 14” four pack (Part# 010209)
7mm x 20” ten pack (Part# 010210) 12 mm x 9” eight pack (Part# 010211)
12mm x 14” four pack (Part# 010212) 12mm x 20” ten pack (Part# 010213)

DEI Introduces Professional Grade Military Spec Hi-Temp Shrink Tubes

AVON LAKE, OH…DEI’s professional grade Hi-Temp Shrink Tubes, made of military spec polyolefin tubing with a high shrink ratio of 3:1, offers the ultimate protection for ignition and electrical wiring, and are ideal for sealing electrical connections. Other uses include bundling wire, hose and cable, all types of wire repair, or any form of splicing or termination.

Designed as an alternative to plastic ties and tape, these Hi-Temp Shrink Tubes have a thick wall structure and are made of material that meets Military spec DTL-23053/5C for a water tight, flame retardant seal that is resistant to debris, dirt and abrasive solvents. Offering a clean professional look, they are flexible and easy to install.

Insulate for Noise and Heat with Boom Mat’s New Thermal & Acoustic Interior Kit

AVON LAKE, OHIO…Now there is a way to keep your vehicle quiet and cool with one easy to use kit that has everything you need to improve vibration noise and reduce heat transfer in small to medium sized vehicles. Boom Mat™, the leader in thermal acoustic control, introduces the Boom Mat Thermal & Acoustic Interior Kit. This recently introduced kit includes 27 sq. ft. of Under Carpet Lite that blocks 85% of heat from a vehicle’s engine, transmission or exhaust, 25 sq. ft. of Boom Mat damping material, developed to reduce structure-borne vibration, squeaks and rattles, and one 18 oz. can of Boom Mat Spray-On.

Boom Mat Introduces 12-1/2” x 24” Damping Material in a New 30 Sheet Pack

Avon Lake, OH…Every vehicle has a unique acoustic signature caused by the combination of engine noise and modifications. Boom Mat damping material greatly enhances cabin acoustics, reducing vibration and noise that can interfere with a quiet ride and quality stereo performance. Developed primarily to eliminate low frequency noise, Boom Mat damping material works by sealing interior holes and leaks and damping structure born noise. Boom Mat now offers its quality damping material in a convenient 30 sheet pack of 12-1/2” x 24”; large enough to complete the interior of a large SUV, wagon or van.

Boom Mat Top Choice for MSD Performance

Avon Lake, OH (June 4, 2014)…The Atomic Deuce is the latest project of MSD Performance designated to debut during the 2014 Hot Rod Power Tour. This classic five window ’32 Coupe that was made popular in the movie American Graffiti features Boom Mat damping material and Floor & Tunnel Shield II.

Boom Mat’s damping material and Floor & Tunnel Shield II are the thermal tuning products of choice for this classic build developed to showcase many of MSD’s performance products. With a goal of keeping the interior cool, comfortable and quiet, MSD selected Boom Mat damping material to cover the entire floor, cowl, roof and doors. The damping material reduces low frequency noise that can cause vibration and adds an extra layer of protection from ambient and direct heat. Flexible and easy to trim, this material is easy to install on metal, plastic or fiberglass and virtually eliminates all unwanted road and engine noise.

Roger Parker Joins CTEK Power, Inc.

Twinsburg, Ohio – Roger Parker, an experienced automotive business manager, has joined CTEK Power, Inc. as the company’s logistics coordinator and inside sales representative. Most recently, Parker was general sales manager for Fitzgerald Automotive Group and spent four years as the park services director at Summit Motorsports Park in Norwalk, Ohio.

In his new role at CTEK, Parker will help lead technical support for the company. He will also be responsible for order fulfillment, customer service, inventory planning and marketing support for CTEK’s sales team.
“Roger’s exceptional interpersonal skills combined with his automotive experience, including his time as an ASE certified automotive technician, provides CTEK with a strong technical support background that will benefit our customers,” said Andreas Naeslund, president of Americas for CTEK.

CTEK Power, Inc. Names Andreas Naeslund as President, Americas

Twinsburg, Ohio – CTEK Power, Inc. has announced the appointment of Andreas Naeslund as the company’s new president, Americas. Naeslund will oversee sales, marketing, customer service and distribution for the company’s leading brand of smart charging battery systems in the North and South America markets. He will report to Jon Lind, CEO, CTEK Group.

“I’m excited to join CTEK, a company that is a respected supplier of premium car manufacturers worldwide,” said Naeslund. “CTEK has a strong team of professionals and an innovative product lineup that is beloved by customers around the globe. I look forward to the challenge of expanding our technologically superior battery charging solutions into a broader number of market segments.”

The Official Barrett-Jackson Battery Charger and Maintainer Powered by CTEK is Now Available

Twinsburg, Ohio – The Official Barrett-Jackson Powered by CTEK Battery Charger and Maintainer is a fully automatic 8-step charger that maximizes battery life and performance. The charger can solve a broad range of battery-related problems and is the perfect charger and maintainer for collector car owners with exacting demands. The Official Barrett-Jackson Powered by CTEK Battery Charger and Maintainer delivers selectable 0.8 A or 4.3 A to 12 V batteries from 1.2–110 Ah and is suitable for maintenance charging up to 160 Ah. CTEK is one of a handful of elite companies with an official licensing agreement with Barrett-Jackson. Visit www.barrett-jackson.com, www.smartercharger.com/barrett-jackson or phone 800-941-7611.
###

Syndicate content