- Contact Us
Racing & Performance
This Removable Split Heat Protection Tube is made by fiberglass and aluminum.
The outside 2 layer is aluminum and it provide a good reflective, inside layer is fiberglass. This Removable Split Heat Protection Tube can be used to control cables, gear cables, cooling tubes, air conditioning and ventilation pipes, fuel hoses, wire sets and heat sensitive parts for Protection. This aluminum fiberglass corrugated tube also can be used on the copper pipes which are used for shifter cables, speed indicator cables, hydraulic systems, electrical cables and LPG systems for Protection purposes.
This tube’s Bending Radius is about 1.5 times of ID.
This Removable Split Heat Protection Tube can resistant -40°C--+350°C.
Jeep JKs are some of the most popular off road vehicles on the planet. The only problem is that they’re light on room to accessorize them. When it comes to installing big, loud, nasty train horns – size almost always matters most. That is, until the TrailBlaster™ bolt-on dual air horn kit from Kleinn Air Horns arrived. Jeepers with this system constantly tell us that they can’t believe the amount of sound that comes out of their horns! The system uses a small-but-potent air compressor and a 0.66 gallon air tank, which are mated to a purpose-built, made in USA bracket that fits into factory locations in the rear chassis area of 2007-2014 Jeep JKs. The TrailBlaster™ requires no cutting, welding or drilling and is able to be installed using simple hand tools. The kit features a second bracket that is also made in the USA that allows our XCR2.0 corrosion-resistant Model 101 horns to be bolted to a factory location at the charcoal canister.
New from Kleinn Air Horns is our forward-thinking, forward-installation, expandable Ford Onboard Air System for 2009-2014 Ford F-150 and F-150 Raptor. It is intended for all F-150 models except EcoBoost™. The system features a 100% duty cycle air compressor and 3-gallon, multi-port air tank. The system is expandable with an option for a second air compressor to double the system’s already quick tank refill rate. The system uses a custom 11-gauge steel, powder-coated bracket that is made in the USA, The system mounts securely between the front frame rails, and just in front of the radiator of the Ford F-150 using ¾-inch hardened steel bolts. Its compact design allows all parts of the system to exist in the same space, without using any cargo space whatsoever. Wiring for the system is simple, with an included custom-fit wiring harness that only requires a few basic connections. Installation time for this system is fast, at approximately one hour.
Ford F-150 Dual Train Horn System
For 2009-2014 Ford F-150
Ford F-150 Heavy Duty Triple Train Horn System Featuring The Beast™
For 2009-2014 Ford F-150
At C&R Racing we have added the 16" fan ring we currently use in NASCAR, and hi performance SPAL fan to this new line. The fan ring is water jetted out of .100 aluminum and is bolted to the radiator, making for a stronger part. No chance for the fan to move around on the radiator. We also seal the fan to the core which increases the cooling capability.
Comes pre-assembled with hi performance 16" SPAL curved blade puller fan, Current water jetted 16" Fan ring, SPAL 40 amp relay. Features C&R Racing unique replaceable inlet (not included) available in 1-1/4", 1-1/2", 1-3/4", -16AN male & -20 AN male.
Made for racing but perfect for Hot Rods, muscle cars or custom applications.
28x19 and 31x19 size options. Inlet and radiator cap sold separately.
Engineered and handcrafted in the USA.
850-28191, 850-31190, 852-28191, 852-31191
PaceSetter New Product Release – Direct-fit Manifold Catalytic Converter For 04-06 Mazda 3 & 06-07 Mazda 5, 2.3L Engine
Phoenix, AZ - PaceSetter Performance Products, designers and manufacturers of quality-made, affordably-priced exhaust systems and components, now offers a direct-fit manifold catalytic converters for the 04-06 Mazda 3 & 06-07 Mazda 5 with the 2.3L engine.
PaceSetter Direct-Fit Manifold Converters utilize mandrel-bent stainless steel tubing for maximum efficiency and CNC-machined thick steel flanges for a factory-like fit and good seal. In addition, these Manifold Converters have provisions for the factory heat shields and for the O2 Sensor.
Using EPA-approved catalytic converters for OBD II applications, PaceSetter created an extensive selection of OBD II applications for both foreign and domestic brand cars and light trucks – from Malibu to Camry and BMW to Escape.
Avon Lake, OH (October 8, 2014)…Stainless steel locking ties are commonly used in many different automotive applications. Both light and strong they can take a lot of abuse but are finicky to work with especially for the average guy who doesn’t use them every day.
DEI has developed an effective tool to tighten stainless steel locking ties. This tool saves time and hassle while providing a professional looking result. Simply slide the tool on the end of any ¼” nut driver, engage the tie, and twist. This gets the tie nice and secure without the hassle.
DEI’s Locking Tie Tool will fit on the end of any standard ¼” drive extension so working in tight spaces is not a problem. This specialty tool works with all popular styles of stainless ties - up to ½” wide.
Made with hardened tool steel and black oxide coated for years of trouble free use this is one specialty tool no tool box should be without.
Part #: 010220
Availability: November 2014
Dennis Gage, Host of My Classic Car, Makes Appearance at DEI’s SEMA Booth on Thursday, November 6 from 3:30 p.m. - 4:30 p.m.
Avon Lake, OH (October 7, 2014)…Dennis Gage, the easily recognized handlebar mustachioed host of My Classic Car, will make an appearance at DEI’s booth #20013 on Thursday, November 6 from 3:30 until 4:30 p.m. My Classic Car is a weekly television program that capture’s America’s love affair with the automobile that is now in its 18th season on Velocity and MAVTV.
Tom Miller, Design Engineering’s VP of sales and marketing, says,” My Classic Car provides the most complete coverage on classic vehicles, from complete restorations, to top events throughout the country to step-by-step “how-to” projects. Dennis covers it all with authority and humor to keep the show fresh and entertaining each week. We are delighted that he is going to make an appearance at our booth on Thursday afternoon to sign autographs and answer your questions.”
Knitted Fiberglass Sleeve is fabricated from high quality type E-glass fiber that will not burn and will withstand continuous exposure to temperatures of 1000°F / 520°C. This Knitted Fiberglass Sleeve provides protection for industrial wires, cables, hydraulics hoses, tubing and pipes, along with providing thermal insulation and personnel protection.
Fiberglass Knitted Sleeve resists most acids and alkalis and is unaffected by most bleaches and solvents. It is highly flexible and conformable.