- Contact Us
Racing & Performance
32 oz Silicone Coated Fiberglass Cloth offers good resistance to extreme temperatures, being able to operate normally from -500C to +2500C. It also has excellent weatherproof, water repellent, good chemical resistance to acids and lye, good mechanical properties for make-up.
A midweight (32oz/yd2; 1085g/m2) high temperature resistant fabric, constructed from a glass fiber base fabric, impregnated both sides with a specially compounded silicone rubber coating designed to shed heavy weld spatter and resist heat and occasional flame.
32 oz Silicone Coated Fiberglass Cloth is completely impervious to water, moisture, hydraulic oils. It is used primarily for fabrication of premium grade valve insulation covers, hanging flame-protection blankets in outdoor and offshore use, and protective molten splash applications.
BSTFLEX provides one-sided/double-sided silicone coated fiberglass fabrics with many varieties of coating weight, colors and widths for difference applications.
BSTFLEX Fiberglass T25/T28 Turbo Blanket Materials:
-Silicone Impregnated Fiberglass Outer Shell
-Calcium Magnesium Silicate Wool Inner Core
(secured with Stainless Steel Wire Mesh)
-Stainless Steel Capstan Rivets
-Stainless Steel Wire Fasteners
BSTFLEX Fiberglass T25/T28 Turbo Blanket Heat Tolerance:
Max Temperature Rating: 2012 Deg F / 1100 Deg C
Continuous Use Limit: 1832 Deg F / 1000 Deg C
Direct Contact Limit: 600 Deg F / 316 Deg C
Radiant Heat Limit: 1100 Deg F / 593 Deg C
BSTFLEX Fiberglass T25/T28 Turbo Blanket Color:
Black, gray, red, blue, yellow, green, pink, purple, aluminum silver
Designed to fit T25 or T28 turbochargers without interfering with the actuator arm.
Titanium T6 Turbo Blanket Materials:
With an outer layer made from actual pulverized volcanic lava rock (continuous-filament basalt) formed into fabric and woven into a tight mesh weave, these turbo blankets are internally insulated with high temperature calcium magnesium silicate wool, overlaid with a high temperature silica fabric for increased durability and for improved thermal resistance. We also provide LAVA fiber fabric inside, too. The Lava Turbo Blankets are designed to withstand the harshest of conditions.
Titanium T6 Turbo Blanket Heat Tolerance:
Max Temperature Rating: 2300 Deg F/ 1260 Deg C
Continuous Use Limit: 1832 Deg F/ 1000 Deg C
Direct Contact Limit: 1800 Deg F/ 982 Deg C
Radiant Heat Limit: 2500 Deg F/ 1371 Deg C
Fits T6 flange turbocharger housings.
The Aluminized Kevlar Fiber Fabric is made from Kevlar with a aluminum foil finish. The Aluminized Kevlar Fiber Fabric can withstand up to 3000°F of radiant heat and can withstand direct contact up to 1100°F. Performance lab tested at 3000°F (1650°C) for 1 minute, Aluminized Kevlar Fiber Fabric reflects at least 90% of radiant heat energy.
The aluminum layers of the Aluminized Kevlar Fiber Fabric will not delaminate from the cloth, even under the most extreme heat conditions.
Aluminized Kevlar Fiber Fabric has extremely durable construction, and can meet the most demanding abrasion and tensile strength requirements.
This Aluminized Kevlar Fiber Fabric can be used to make aluminized kevlar sleeve or aluminized kevlar fire blanket, or aluminized kevlar cloth.
Performance Rod & Custom from Boonville, Indiana is excited to announce that we will be exhibiting at the 2014 SEMA trade show in Las Vegas. PRC will be featuring its 55, 56, and 57 Chevy Radiator/Core support cooling system. This unit can be built for any engine configuration. The PRC unit is a bolt in unit and comes complete with the radiator core support, radiator, aluminum fan shroud, SPAL fans, A/C condenser, overflow tank, and fan relay wiring harness.
Please stop by the PRC booth # 34230 and let us show you some of the other quality products made by Performance Rod & Custom.
Hook-and-loop fastener made of stainless steel or brass, nickel-plated.
Hook-and-Loop Fastener can endure the most demanding of liquid metal splash and heavy weld splatter. This sleeve also provides energy savings and personnel protection.
Firesleeve With Hook-and-Loop Fastener provides molten splash & weld splatter protection to wires, cables, hoses, tubes and pipes. Firesleeve With Hook-and-Loop Fastener provides a field installable protection sleeve utilizing metal Hook-and-Loop Fastener instead of Velcro closure strips.
Available in sizes from 1" through 12" ID. Firesleeve With Hook-and-Loop Fastener Withstands Molten Splash & Welding Splatter. Withstands 500°F / 260°C continuous exposure; 2200°F / 1205°C for periods up to 15 minutes and short flash excursions to 3000°F / 1650°C.
Firesleeve With Zipper Closure use a nomex zipper with brass teeth instead of Velcro closure strips.
Firesleeve With Zipper Closure provides molten splash & weld splatter protection to wires, cables, hoses, tubes and pipes.
Firesleeve With Zipper Closure is made by fiberglass and silicone.
Firesleeve With Zipper Closure Withstands Molten Splash & Welding Splatter. Fire Sleeve With Zipper Closure Withstands 500°F / 260°C continuous exposure; 2200°F / 1205°C for periods up to 15 minutes and short flash excursions to 3000°F / 1650°C.
Silica Braided Sleeve is a braided silica sleeve, constructed from a 96% pure SiO2 silica fiber, suitable for continuous use at 1800°F (982°C), and able to withstand short term exposure up to 3000°F (1650°C).
Silica Braided Sleeve is ideal for protection of delicate components and personnel from exposure to high temperature exhausts and pipes.
This Silica Braided Sleeve cuts easily with scissors or shears and expands to allow easy installation over water cooling hoses, hydraulic hoses, and electrical cables. Also provides great insulation for exhaust systems.
Braided 96% pure silica fiber, the health conscious alternative to asbestos and ceramic sleeves and wraps.
Aluminum Laminated Fiberglass Sleeving is an extremely high temperature-resistant protective tube providing superior protection from radiant heat.
Aluminum Laminated Fiberglass Sleeving is constructed by laminating an aluminized metallic heat shield to a layer of strong, tightly braided fiberglass insulation.
Performance lab tested at 3000°F (1650°C) for 1 minute,Aluminum Laminated Fiberglass Sleeving reflects at least 90% of radiant heat energy.
Fiberglass Reflect sleeve can be used to protect industrial wires, cables, hydraulics hoses, piping and tubing from radiant heat sources such as glowing steel slab, liquid metal pour stream, infrared heaters and other similar sources.
Aluminum Coated Fiberglass Reflect Sleeve is available in sizes from 2/5 " through 18,1/2 ".
Aluminum Coated Fiberglass Reflect Sleeve can be cut into required lengths. Larger sizes are available under special order.
Heat Reflective Aluminized Fiberglass Sleeve can be used to protect industrial wires, cables, hydraulics hoses, piping and tubing from radiant heat sources such as glowing steel slab, liquid metal pour stream, infrared heaters and other similar sources.
Heat Reflective Aluminized Fiberglass Sleeve is constructed of a woven E glass fabric with aluminium foil laminated to its outer surface utilising a resilient high temperature adhesive. the sleeve is formed by folding the material and sewing the edge with an Aramid or Fibre-glass thread. It reflects more than 95% of the radiant energy that hits its surface, keeping the underlying cables and hoses cool.
Heat Reflective Aluminized Fiberglass Sleeve offers superior thermal protection to components, especially in the Automotive Industry, where they are in close proximity to engines and exhaust systems. The sleeving is typically used to cover / protect:
Engine wire harnesses
Hoses and tubing