- Contact Us
Racing & Performance
Colored Fiberglass Exhaust Wrap features a color coating which not only gives your vehicle that custom look, but it also increases the life of the colored exhaust wrap by as much as 3 times! Wrapping the exhaust system with our colored exhaust wrap maintains hotter exhaust gases, decreases the gases density, and that allows it to exit the system faster.
Greater exhaust scavenging is produced helping to lower intake temperatures: that equals more horsepower. Colored Fiberglass Exhaust Wrap also reduces radiant heat damage and can lower under hood temperatures by as much as 50%. Our colored exhaust wrap withstand 1200°F continuous and 2000°F intermittent. Wrap around your exhaust pipe, using overlap to hold itself in place us our Thermal-Tie, hose clamps, or wire to secure ends in place.
Colored Fiberglass Exhaust Wrap is available in black, blue, red, yellow, black, gold, silver, purple, and green.
Titanium Exhaust Pipe Heat Shield provides extreme heat protection up to 1350°F.
The outer layer of Titanium Exhaust Pipe Heat Shield is made from pure titanium fiber fabric, middle layer is special glass wool, inner layer is fiberglass fabric.
With the strategic placement of Titanium Exhaust Pipe Heat Shield near transmissions, brake lines, floorboards, body panels, diesel exhaust stacks or motorcycle pipes, radiant heat can be controlled for maximum protection and performance. Other uses include isolated areas such as sections of the exhaust pipe after the collector, an area that can heat transmission fluid, or along the path of an exhaust system in proximity of gas tanks, differentials and rear facias. The shield is designed for multiple automotive applications as well as marine, power sports, diesel and industrial applications where heat dissipation and thermal control is needed.
500°F/260°C Continuous Exposure: Higher Intermittent
Knitted Fire Sleeve
Knitted high bulk glass fiber fire sleeve can withstand repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C).
Knitted fire sleeve withstands repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C). The heavy coating of our proprietary iron oxide red silicone rubber compound sheds molten metal splash immediately, so very little heat transfer occurs.
Knitted Fire Sleeve can be printed with identification, trademarks, warnings, etc. Customs length per spool is available.
Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this product
Proudly Made By BST Thermal Protection Products Co.,Ltd
500°F/260°C Continuous Exposure: Higher Intermittent
Industry Fire sleeve
Industry Fire sleeve is designed to protect hoses,wires and cables from the hazards of high heat and occasional flame.
Fire Sleeve protects continuously to 260°C/500°F and will withstand a molten splash at 1200°C/2200°F. Made of braided fiberglass yarns in a flexible substrate,it is then coated with a high grade silicone rubber.
Resistant to hydraulic fluids, Lubricating oils,and fuels, Silicone Sleeve insulates against energy loss in piping and hosing;protects employees from burns;and allows bunding of wires,hoses,and cables.
Industry Fire sleeve is the perfect cover to protect hydraulic hoses,pneumatic lines and wiring bundles.
Silicone coated fiberglass Fire Sleeve can withstand repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C).
Fiberglass Braided Sleeve is a braided fiberglass (fibreglass / glassfibre) sleeve, fabricated from high quality type E fiberglass that will not burn and will withstand continuous exposure to temperatures of 1100°F / 593°C. It provides excellent protection for industrial wires, cables, hydraulics hoses , tube and pipes and also provides thermal insulation and personnel protection.
Fiberglass Braided Sleeve can be used by itself, or under other sleeve products (such as FIRE SLEEVE) to significantly boost insulation values at modest cost.
Fiberglass Braided Sleeve is available in 2 grades: 1/8″ (3.2 mm) wall thickness or 1/16″ (1.6 mm) wall thickness.
Fiberglass Braided Sleeve resists most acids and alkalis and is unaffected by most bleaches and solvents. It is highly flexible and conformable.
Expandable Acrylic Saturated Fiberglass Thermo Sleeve
Constructed from smooth glass fiber yarn, braided at high yield angles to allow for approx: 25% expansion and contraction.
Heavy wall braided glass fiber sleeve
Expandable Acrylic Saturated Fiberglass Thermo Sleeve is an expandable braided glass fiber sleeve capable of operating at a continuous temperature of 1000°F (538°C).
Designed to expand and contract by approximately 25% of its nominal size, the smooth glass fiber yarn is heat cleaned and coated with an acrylic saturant to eliminate loose fibers, enhance handling characteristics, and improve abrasion resistance. The acrylic saturant begins to decompose around 400°F (204°C), but with no effect on the thermal performance of the sleeve.
Color: Natural tan color is standard.
Expandability creates custom size range
Titanium T3 Turbo Blanket Materials:
- titanium fiber fabric Outer Shell
-Calcium Magnesium Silicate Wool Inner Core
(secured with Stainless Steel Wire Mesh)
- inside silica fabric
-Stainless Steel Capstan Rivets
-Stainless Steel Wire Fasteners
Titanium T3 Turbo Blanket Heat Tolerance:
Max Temperature Rating: 2300 Deg F/ 1260 Deg C
Continuous Use Limit: 1832 Deg F/ 1000 Deg CExterior Surface:
Direct Contact Limit: 1800 Deg F/ 982 Deg C
Radiant Heat Limit: 2500 Deg F/ 1371 Deg C
Fits T3 flange turbocharger housings.
GOLD Heat Reflective Tape is a metalized polyamide polymer laminated glass cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. It is lightweight and easy to apply and remove.
Highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms – anything or area that needs protection from heat.
GOLD Heat Reflective Tape Quick Facts
For firewalls, bulkheads, engine covers, floors, seat bottoms & more
Capable of handling continual temperatures up to 850°F
Resists UV degradation for long-term performance
Virtually NO clearance needed
Adhesive protected by a release liner rated up to 325°F
Light weight and flexible-Trim to size
Nylon Protective Hose Sleeving Features and Benefits:
Protects against physical abrasion, damage and deterioration
Meets ISO 6945 abrasion standards
Provides limits burst and containment protection
Extremely durable and flexible Nylon
Guaranteed to fit your specific application
Multiple round ID width available
Nylon Protective Hose Sleeving Applications:
Protects hose from abrasion and degradation
Offers limited protection from the effects of hose bursting and pinhole occurrences
Allows bundling of hose, cable, rope, chain, wire, etc.
When installed over uncoated cable or chains, Nylon Protective Hose Sleeving will prevent scraping, chafing and contact damage to painted or other fragile surfaces.
Nylon Protective Hose Sleeving is resistant to chemicals, UV damage and rot, and is suitable for continuous outdoor use under all weather conditions.
Carbon Fiber Heat Shield Thermal Barriers is designed to mount inside your vehicle on top of the floor or sound deadener to protect you from heat radiating from the engine and exhaust. This Carbon Fiber Heat Shield Thermal Barriers is extremely efficient at dissipating heat.
Carbon Fiber Heat Shield Thermal Barriers is capable of withstanding a continuous 1,800 degrees Fahrenheit, so it’s more than ready to handle anything your floor boards and interior are subjected to.