- About the SEMA Show
- Buy a Booth
- Why Exhibit?
- New Products Showcase
- Travel and Lodging
- Exhibitor Summit
- Learn About Exhibiting
- Exhibitor Information
- How to Succeed at the SEMA Show
- International Resources
- Promote Your Booth
- Exhibitor Manual
- Exhibitor List/Floorplan
- Submit a Press Release
- Feature Vehicles
- Show Directory Listing Update Instructions
- Key Show Contacts
- Contact Us
Racing & Performance
Carbon Fiber Heat Shield Thermal Barriers is designed to mount inside your vehicle on top of the floor or sound deadener to protect you from heat radiating from the engine and exhaust. This Carbon Fiber Heat Shield Thermal Barriers is extremely efficient at dissipating heat.
Carbon Fiber Heat Shield Thermal Barriers is capable of withstanding a continuous 1,800 degrees Fahrenheit, so it’s more than ready to handle anything your floor boards and interior are subjected to.
Woven Heat Reflective Sleeve is a highly flexible aluminized low bulk fiberglass sleeving used to protect components in high temperature areas. The outer aluminum finish is highly reflective while the inner layer of fiberglass greatly increases insulating efficiency.
Woven Heat Reflective Sleeve has different sizes, normal is from 3/8” to 4".
Woven Heat Reflective Sleeve is a unique, one-piece fiberglass sleeve that permits the sleeve to boast a virtually seamless and non-fraying construction. This sleeve provides superior fluid resistance and maximum protection for tubing's and hoses, engine wire harnesses, and other critical components requiring radiant heat protection.
Adhesive backed silica tape is a slit silica tape constructed from 96% pure SiO2 silica fiber, coated one side with a pressure sensitive adhesive backing that facilitates installation. The adhesive decomposes at high temperatures, leaving a perfectly tape-wrapped hose, cable or pipe.
This Adhesive backed silica tape is suitable for use at 1800°F (982°C), and able to withstand short term exposure up to 3000°F (1650°C), Adhesive backed silica tape sets the standard for flexibility and minimum lineal shrinkage under high heat conditions.
Width 20 mm to 1000 mm. Normal width is 2" ( 50 mm) and 4" (100 mm ). Customs width is available.
Titanium Heat Sleeve is the best protection sleeves on the market. This sleeve won't change the color ever. It is made by pure titanium fiber braided.
Titanium Heat Sleeve offers the best possible sleeve protection on the market today. Developed specifically for any application where extreme high heat is present, this Titanium Heat Sleeve is used to protect wires, lines and cables when exposed up to 1800°F direct heat/2500°F radiant.
Titanium Heat Sleeve provide superior thermal protection for street vehicles or race engines, protecting fuel, oil lines, spark plug and electrical wires from direct or under hood radiant heat.
This Titanium Heat Sleeve use same material of our Titanium Spark Plug Boot Protector.
Titanium Spark Plug Boot Protector made by pure titanium fiber, this material is naturally resistant to heat, chemicals, abrasions and contaminants. The material is stranded and woven into a tight, proprietary style weave for added durability and strength, yet is pliable enough to provide a universal fit for straight or angled boots.
Titanium Spark Plug Boot Protector can resistant heat up to 1800°F (983°C) providing the ultimate protection for today's high voltage ignition systems for many applications including automotive, marine and power sports .
Titanium Spark Plug Boot Protector use titanium fiber, and it looks like carbon fiber appearance that looks great under the hood - ideal for race, street, show cars and off road vehicles.
Over the last 6 months, the build process of the MagnaFlow Team Support Vehicle (MF-TSV) has been documented on the MavTV show “Chop Cut Rebuild.”
“Over the course of 10 successful seasons, Chop Cut Rebuild has relied numerous times on the team at MagnaFlow to deliver quality products and interesting content for our series. Without fail, MagnaFlow has come through every time with ‘above the bar’ products and service. No matter if it’s Ford, Chevrolet, or even a Bricklin, MagnaFlow can, and does, deliver the performance exhaust products we need season after season.” - Dan Woods, Executive Producer/Host, Chop Cut Rebuild
Spark Plug Boot Protector protect your expensive plug wire set’s performance and increase their lifetime. Spark Plug Boot Protector fits most boots-even 90 degrees. Spark Plug Boot Protector is available in six colors - red, blue, black, tan, yellow, green, purple, silver and orange and withstand up to 1200°F.
Easy installation: place ring side on end of spark plug boot and slide the wide end towards the wire, ring side of Spark Plug Wire Heat Shield Protector should rest between cylinder head and top of plug boot.
Spark Plug Boot Protector Quick Facts
Double-wall construction for added durability
Helps prevent burn-through, hardening and cracking of boots
Installs in seconds
Universal-fits most straight or angled boots
Withstands 1200°F direct continuous heat
Non-flammable & protects against chemicals & resists water
The Titanium Exhaust Wrap - twill is constructed from fragmentized lava rock that is extruded into the fibers to create a heat wrap that will give you strength and performance you expect from an exhaust header wrap.
When properly installed, the proprietary weave in our heat wrap will allow an even dissipation of heat so that it will not over insulate your pipings or create any hot spots.
Titanium Exhaust Wrap - twill promotes increased flow and keeps down underhood temperatures for improved performance and reduced vibration breakdown.
Titanium Exhaust Wrap - twill is chemical and oil resistant that will not shrink or loose flexibility under extreme conditions. Titanium Exhaust Wrap is very easy to install and tightens down onto pipings without needing to be wet.
Lava Heat Wrap Tolerance:
Direct Contact Use Limit: 1800°F / 982°C
Max Contact Use Limit: 2500°F / 1371°C
Titanium Exhaust Wrap - twill quick facts
Titanium Exhaust Wrap - Plain weave is made from pulverized lava rock and stranded into a fiber material and woven into a proprietary weave. Titanium Exhaust Wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability.
Titanium Exhaust Wrap - Plain weave is asbestos free and is made from a base high quality basalt yarn. The basalt fiber is naturally chemical, acid, water and fungus resistant. It is also non combustible.
Using Lava Wrap on a header and exhaust system, maintains hotter exhaust gases, decreases gas density, and that allows the exhaust gas to flow out of the system faster.
Titanium Exhaust Wrap - plain weave quick facts
Rated for 1200°F continuous use, 2000°F intermittent
Reduces under hood temperatures up to 50%
Can increase horsepower
25% Stronger than fiberglass wraps
thick 1.5 mm, 2 mm, 3 mm, 4 mm, 5 mm
BSTFLEX Fiberglass T4 Turbo Blanket Materials:
-Silicone Impregnated Fiberglass Outer Shell
-Calcium Magnesium Silicate Wool Inner Core
(secured with Stainless Steel Wire Mesh)
-Stainless Steel Capstan Rivets
-Stainless Steel Wire Fasteners
BSTFLEX Fiberglass T4 Turbo Blanket Heat Tolerance:
Max Temperature Rating: 2012 Deg F / 1100 Deg C
Continuous Use Limit: 1832 Deg F / 1000 Deg C
Direct Contact Limit: 600 Deg F / 316 Deg C
Radiant Heat Limit: 1100 Deg F / 593 Deg C
BSTFLEX Fiberglass T4 Turbo Blanket Color:
Black, gray, red, blue, yellow, green, pink, purple, aluminum silver