- About the SEMA Show
- Buy a Booth
- Why Exhibit?
- New Products Showcase
- Travel and Lodging
- Exhibitor Summit
- Learn About Exhibiting
- Exhibitor Information
- How to Succeed at the SEMA Show
- International Resources
- Promote Your Booth
- Exhibitor Manual
- Exhibitor List/Floorplan
- Submit a Press Release
- Feature Vehicles
- Show Directory Listing Update Instructions
- Key Show Contacts
- Contact Us
Racing & Performance
Spark Plug Boot Protector protect your expensive plug wire set’s performance and increase their lifetime. Spark Plug Boot Protector fits most boots-even 90 degrees. Spark Plug Boot Protector is available in six colors - red, blue, black, tan, yellow, green, purple, silver and orange and withstand up to 1200°F.
Easy installation: place ring side on end of spark plug boot and slide the wide end towards the wire, ring side of Spark Plug Wire Heat Shield Protector should rest between cylinder head and top of plug boot.
Spark Plug Boot Protector Quick Facts
Double-wall construction for added durability
Helps prevent burn-through, hardening and cracking of boots
Installs in seconds
Universal-fits most straight or angled boots
Withstands 1200°F direct continuous heat
Non-flammable & protects against chemicals & resists water
The Titanium Exhaust Wrap - twill is constructed from fragmentized lava rock that is extruded into the fibers to create a heat wrap that will give you strength and performance you expect from an exhaust header wrap.
When properly installed, the proprietary weave in our heat wrap will allow an even dissipation of heat so that it will not over insulate your pipings or create any hot spots.
Titanium Exhaust Wrap - twill promotes increased flow and keeps down underhood temperatures for improved performance and reduced vibration breakdown.
Titanium Exhaust Wrap - twill is chemical and oil resistant that will not shrink or loose flexibility under extreme conditions. Titanium Exhaust Wrap is very easy to install and tightens down onto pipings without needing to be wet.
Lava Heat Wrap Tolerance:
Direct Contact Use Limit: 1800°F / 982°C
Max Contact Use Limit: 2500°F / 1371°C
Titanium Exhaust Wrap - twill quick facts
Titanium Exhaust Wrap - Plain weave is made from pulverized lava rock and stranded into a fiber material and woven into a proprietary weave. Titanium Exhaust Wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability.
Titanium Exhaust Wrap - Plain weave is asbestos free and is made from a base high quality basalt yarn. The basalt fiber is naturally chemical, acid, water and fungus resistant. It is also non combustible.
Using Lava Wrap on a header and exhaust system, maintains hotter exhaust gases, decreases gas density, and that allows the exhaust gas to flow out of the system faster.
Titanium Exhaust Wrap - plain weave quick facts
Rated for 1200°F continuous use, 2000°F intermittent
Reduces under hood temperatures up to 50%
Can increase horsepower
25% Stronger than fiberglass wraps
thick 1.5 mm, 2 mm, 3 mm, 4 mm, 5 mm
BSTFLEX Fiberglass T4 Turbo Blanket Materials:
-Silicone Impregnated Fiberglass Outer Shell
-Calcium Magnesium Silicate Wool Inner Core
(secured with Stainless Steel Wire Mesh)
-Stainless Steel Capstan Rivets
-Stainless Steel Wire Fasteners
BSTFLEX Fiberglass T4 Turbo Blanket Heat Tolerance:
Max Temperature Rating: 2012 Deg F / 1100 Deg C
Continuous Use Limit: 1832 Deg F / 1000 Deg C
Direct Contact Limit: 600 Deg F / 316 Deg C
Radiant Heat Limit: 1100 Deg F / 593 Deg C
BSTFLEX Fiberglass T4 Turbo Blanket Color:
Black, gray, red, blue, yellow, green, pink, purple, aluminum silver
Silicone Coated Fiberglass Tape is a fiberglass tape coated with iron oxide red silicone rubber. This tape is designed compound sheds molten metal splash immediately, so very little heat transfer occurs. Silicone Coated Fiberglass Tape can withstand repeated exposures to molten steel, molten aluminum and molten glass, up to 3000°F (1650°C).
Silicone Coated Fiberglass Tape withstands continuous exposure to 500°F (260°C), up to 2000°F (1090°C) for 15-20 minutes, and up to 3000°F (1650°C) for 15-30 seconds. It is same material as our fire sleeve. When exposed to flame, the silicone rubber transforms to a crust, creating a protective SiO2 refractory layer.
Silicone Coated Fiberglass Tape is used to protect construction Vehicles & Equipment, Hydraulic & Pneumatic Equipment, Mining Equipment, Aerospace & Defense, Marine, Navy & Offshore, Off-Road Vehicles, Railways Trains & Systems.
Silicone Coated Fiberglass Tape Quick Facts
Continuous operating temperature 500°F (260°C)
Aluminum Fiberglass Exhaust Wrap
Material (inner): pure virgin glass fiber
(Outer): aluminum alloy mylar foil
Thickness: 1mm, 1.5mm, 2mm, 3mm
Width: 25mm, 50mm, 100mm, 150mm, 200mm
Radiant heat protection up to 2000°f
Premium weave stays together
Used to wrap multiple applications including: air intake, intercooler, supercharger, turbo pipes and tubing, starters, hoses, wiring, cold air induction systems, protects body parts and components by reflecting heat away. keeping inner air and parts cooler and more efficient.
Used on exhaust headers and pipes up to 1300°f
Keeps heat where you want it and away from where you don't!
Not just for high performance vehicles!
This Corrugated Heat Protection Tube is made by aluminium, stainless steel, coated glass-fibre, PET-Fleece, paper, insulation material.
2 layer, 3 layer, or more layer aluminum foil is available. This Aluminum Heat Protection Tube can be used to control cables, gear cables, cooling tubes, air conditioning and ventilation pipes, fuel hoses, wire sets and heat sensitive parts for Protection. This Aluminum Heat Protection Tube also can be used on the copper pipes which are used for shifter cables, speed indicator cables, hydraulic systems, electrical cables and LPG systems for Protection purposes.
Corrugated Heat Protection Tube size 8 mm to 100 mm.
Lava Mat Heat Shield is made from crushed volcanic rock with a woven pattern look. This insulator helps to reflect and dissipate heat making it perfect to be an air box heat shield or a heat shield barrier to protect the paint on your carbon fiber/fiberglass hood. Due to basalt’s (mineral from volcanic rock) natural chemical and acid resistant properties, Lava Shield is excellent for use in harsh environments Our Lava Mat Heat Shield may be used on a fire-wall to shield radiant heat it is also perfect to shield heat in transmission tunnels.
Held in place on a clean, oil free surface with high temp adhesive to withstand radiant heat of up to 1200°F direct/continuous and 1800° intermittent. Can also be held in place with screws, rivets or stainless wire ties for an extra measure of security when exposed to elements such as dirt, oil and water. Use on your hood, body panel, firewall, floor board, fuel cell or gas tank.
Lava Mat Heat Shield Quick Facts
Thermal Heat Shield sleeve is made by fiberglass and capable of withstanding 1200°F continuous and this nonflammable sleeve has a special weave that allows it to expand and contract over fittings and terminals.
This is a perfect way to protect wires, fuel lines, brake lines, clutch lines for your custom build. Perfect for shielding fuel lines-helping to stop vapor lock, protect sensitive wire looms from close proximity heat, shield brake lines and hoses, stop clutch cables from melting.
Thermal Heat Shield sleeve Quick Facts
Special weave allows heat sleeve expand and contract over fittings and terminals
Prevents vapor lock on fuel lines
Shields wire looms and fluid lines from heat
Reflects and dissipates heat
Tan Exhaust Wrap is made by fiberglass materials, it will not lose color ever.
Wrapping headers and down pipes is an important first step in reducing unwanted and power-robbing under hood heat. Less under hood heat results in a cooler air charge for improved performance and keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density & increases exhaust flow.
Tan Exhaust Wrap will decrease your engine bay temperature, improve cooling and add horsepower.