- Contact Us
Mobile Electronics & Technology
Clamp on exhaust Pipe heat shield is flexible protection from heat damage, and it can reflect over 98 percent of the damaging radiant heat of the exhaust.
The kits come complete with all clamps and new stainless stand offs and installs in minutes.
Clamp on exhaust Pipe heat shield is available in one, two and three foot lengths. For exhaust pipes that exceed 3.5", use the 4" clamps of which will accommodate up to 4.5".
Clamp on exhaust Pipe heat shield Quick Facts
Blocks 98 Percent Of Radiant Heat
Provides Ultimate Protection
Installs In Minutes
Starter Heat Shield help prevent starter failure caused by overheating. Using a heat shield for the solenoid and starter can prevent the starter from having starter heat lock. Quality construction and design allow for easy installation.
Crafted from a heat-beating aluminized cloth outer layer wrapped around a heavy-duty glass insulator middle, this starter heat shield can handle intermittent temps up to 2000°F. It's lined with strips of heavy-duty hook-and-loop fastener material to make installation easy.
Starter Heat Shield Quick Facts
Rated for 1100°F continuous use, 2000°F intermittent.
Prevents starter heat soak so you are not stranded
Easy installation, starter removal is not necessary
Perfect when there’s less than 1” of air space between starter and heat source
Self Fusing Silicone Tape is the Original self-fusing silicone insulating & repair wrap.
Self Fusing Silicone Tape is extruded of 100% high performance silicone elastomer. Ingredients in the silicone cause it to permanently bond to itself when stretched and over-wrapped to itself.
Silicone Self Fusing Insulating Tape
• self-fusing, has no residue, never gets gummy or sticky like electrical or duct tape
• Has great tensile strength of >4.9Mpa (700psi), minimum elongation is >200%
• Withstands temperature up to 260℃ (500℉), remains flexible to -30℃ (-85℉)
• Has electrical strength of >20Mv/m, even under temp of 180℃ (356℉) or in oily
• Creates a permanent air-tight, water-tight seal shortly; Tighter stretch, quicker bond
• Resists fuels, oils, acids, solvents, salt water, road salt, UV rays
• extremely versatile, has an unbelievably long shelf life
• Also named end wrap tape, pyrosil tape, rescue tape, silicon tape, insulation tape
Heat Shield Tape With Adhesive is a fiberglass composite tape with a strong adhesive that wraps around your wires and hoses to protect from blazing heat that can deteriorate or melt the plastic on your hoses, wires, and cables resulting in equipment failure.
Heat Shield Tape With Adhesive will protect internal parts from radiant temperatures reaching 2000°F will adding a professional finish to your repairs.
Heat Shield Tape With Adhesive is used where it is not convenient to disconnect one end of a hose or cable because of the catastrophic results that can occur.
Heat Shield Tape With Adhesive width: 20mm, 25mm, 38mm, 50mm, 100m, 150mm, 200mm, 500mm, 1000mm, 1500mm, customers width is available.
Heat Shield Tape With Adhesive length can be cutted.
Mechman Alternators’ Special Edition150amp Black Billet Alternators
Mechman has just released a new 150 amp Black Billet Alternator built specifically for 1996 to 2013 GM full-size trucks and S10 Blazers with gasoline V6 or V8 engines. This special edition alternator produces 100amps of power at idle and reaches full output at 1800 RPMs.
Pleasant Grove, UT (September 8, 2014)—From Palmer Performance Engineering, the creators of the innovative DashCommand™ app, now comes DashLogic, awarded “Best New Interior Accessory Product” at SEMA 2013. A step beyond DashCommand’s™ virtual dashboards that display a vehicle’s performance numbers and engine parameters on its user’s smartphone, DashLogic incorporates the existing driver information center (DIC) and heads-up display (HUD) of late model Chevrolet/GMC cars and trucks (applications below) to display data seamlessly on the factory dashboard.
Pleasant Grove, UT (September 4, 2014)—Performance enthusiasts and racers looking for more in-depth communication with their vehicles can turn their iPhone or Android smartphone, their iPad, or their iPod touch into an advanced in-car computer. Palmer Performance Engineering’s DashCommand™ app provides your vehicle with a virtual dashboard that puts all the vital performance numbers and engine parameters in one place. Its virtual gauges display detailed data on horsepower and torque, boost/vacuum pressure, air/fuel ratio, engine coolant temperature, instant and average fuel economy, and much more. DashCommand™ also integrates the smartphone’s GPS and accelerometer to include specialized features such as racetrack mapping and acceleration data, an inclinometer (for off-roading), and a skid pad feature for measuring g-forces.
CURT Manufacturing, a leading manufacturer and marketer of top-quality towing products, offers the latest technology in brake controls. The TriFlex brake control rises above the rest with its features and compact design. When towing a large trailer, it is essential that the trailer be equipped with brakes and a brake control. Without a brake control, a trailer’s brakes will not activate, creating a potentially hazardous situation for the tow vehicle and others on the road. CURT’s TriFlex brake control significantly reduces a tow vehicles stopping distance while ensuring a smooth stop.
VISIT Beckett Media Booth # 22697 FOR AN AUTOGRAPH SESSION WITH Tom “Mongoose” McEwen & Aaron “The Bearded Wonder” Kaufman
Yorba Linda, CA – Sept 2, 2014 – Beckett Media is proud to announce that we will have two autograph signings at the Beckett Media SEMA Booth #22697. Both TOM “MONGOOSE” MCEWEN & Aaron “ The Bearded Wonder” Kaufman will be available for autographs on Wednesday November 5th:
Drag Racing legend Tom “Mongoose” McEwen
Wednesday November 5th - 12 pm to 1 pm
From the Discovery Channel hit show Fast N’Loud Gas Monkey Garage’s Aaron “ The Bearded Wonder” Kaufman
Wednesday November 5th - 2 pm to 3 pm
Tom “Mongoose” McEwen is a legend. The Mongoose first started drag racing in the early 50’s. His legendary match racing between himself and Don “the Snake “ Prudhomme were so wildly popular that just this past year the Snake and The Mongoose movie was released. The movie depicts one of the greatest rivalries in NHRA history.
The game has certainly changed for those of us who like to tinker with our cars and especially for anyone who has decided to make a career of it. The invasion of computer technology into the automotive world has been a blessing and a curse. Join MagnaFlow for a class designed to solve some of the problems incurred when modifying an exhaust. We’ll cover Air Flow, Scavenging, Back Pressure, O2 Diagnostics, Converter Efficiency, Tuning and MORE!
Date: Wednesday November 5, 2014
Time: 10:00 – 11:00am
Place: New Products Stage, LVCC South Hall Upper Level
And, don’t forget MagnaFlow booth #23543 is your destination for what’s next in aftermarket performance during the SEMA Show!