Mobile Electronics & Technology

BSTFLEX Kevlar Braided Sleeve

Kevlar Braided Sleeve is aramid yarn braided to form a sleeve or tube. Kevlar® does NOT melt or support combustion. Short term exposures (several minutes) as high as 300° C/572° F can be tolerated. Kevlar® sleeving offers strength and durability, yet is relatively light in weight. It is mostly used in the fiber optic and electromechanical cable industries where high temperatures and durability are required of the protective sleeving.

Up to 20 Times Stronger Than Steel
Good chemical resistance
Easy to install
Thermally stable
Cuts easily with Kevlar scissors
Excellent abrasion resistance
Operating Temp. -340° F to 320° F
Will not melt or support combustion
Ideal in extreme environments
Retains properties in very extreme high and low temperatures
Easy to install, Stays Soft, Flexible and Pliable
1-2 expansion ratio

BSTFLEX T2 Turbo Blanket

BSTFLEX Fiberglass T2 Turbo Blanket Materials:
-Silicone Impregnated Fiberglass Outer Shell
-Calcium Magnesium Silicate Wool Inner Core
(secured with Stainless Steel Wire Mesh)
-Stainless Steel Capstan Rivets
-Stainless Steel Wire Fasteners

BSTFLEX Fiberglass T2 Turbo Blanket Heat Tolerance:
Interior Surface:
Max Temperature Rating: 2012 Deg F / 1100 Deg C
Continuous Use Limit: 1832 Deg F / 1000 Deg C
Exterior Surface:
Direct Contact Limit: 600 Deg F / 316 Deg C
Radiant Heat Limit: 1100 Deg F / 593 Deg C

BSTFLEX Fiberglass T2 Turbo Blanket Color:
Black, gray, red, blue, yellow, green, pink, purple, aluminum silver

Titanium T2 Turbo Blanket is available.

See all turbo blanket here
T1 Turbo Blanket
T2 Turbo Blanket
T3 Turbo Blanket
Titanium T3 Turbo Blanket
T4 Turbo Blanket
Titanium T4 Turbo Blanket
T6 Turbo Blanket
Titanium T6 Turbo Blanket
T25/T28 Turbo Blanket
Titanium T25/T28 Turbo Blanket
Subaru WRX Turbo Blanket

BSTFLEX Titanium Subaru WRX Turbo Blanket - turbo heat shield

Titanium Subaru WRX Turbo Blanket Materials:
With an outer layer made from actual pulverized volcanic lava rock (continuous-filament basalt) formed into fabric and woven into a tight mesh weave, these turbo blankets are internally insulated with high temperature calcium magnesium silicate wool, overlaid with a high temperature silica fabric for increased durability and for improved thermal resistance. We also provide LAVA fiber fabric inside, too. The Lava Turbo Blankets are designed to withstand the harshest of conditions.

Titanium Subaru WRX Turbo Blanket Heat Tolerance:
Interior Surface:
Max Temperature Rating: 2300 Deg F/ 1260 Deg C
Continuous Use Limit: 1832 Deg F/ 1000 Deg C
Exterior Surface:
Direct Contact Limit: 1800 Deg F/ 982 Deg C
Radiant Heat Limit: 2500 Deg F/ 1371 Deg C

Titanium Subaru WRX Turbo Blanket designed to fit all stock Subaru WRX/STI turbochargers. They also can fit many other after market turbochargers with internal wastegates.

BSTFLEX Fiberglass Subaru WRX Turbo Blanket - turbo heat shield

BSTFLEX Fiberglass Subaru WRX Turbo Blanket Materials:
-Silicone Impregnated Fiberglass Outer Shell
-Calcium Magnesium Silicate Wool Inner Core
(secured with Stainless Steel Wire Mesh)
-Stainless Steel Capstan Rivets
-Stainless Steel Wire Fasteners

BSTFLEX Fiberglass Subaru WRX Turbo Blanket Heat Tolerance:
Interior Surface:
Max Temperature Rating: 2012 Deg F / 1100 Deg C
Continuous Use Limit: 1832 Deg F / 1000 Deg C

Exterior Surface:
Direct Contact Limit: 600 Deg F / 316 Deg C
Radiant Heat Limit: 1100 Deg F / 593 Deg C

BSTFLEX Fiberglass Subaru WRX Turbo Blanket Color:
Black, gray, red, blue, yellow, green, pink, purple, aluminum silver

Subaru WRX Turbo Blanket is designed to fit all stock Subaru WRX / STI turbochargers. They also can fit many other after market turbochargers with internal wastegates.

See all turbo blanket here
T1 Turbo Blanket
T2 Turbo Blanket
T3 Turbo Blanket
Titanium T3 Turbo Blanket
T4 Turbo Blanket

The world first portable multi-function 24v Li-Polymer Jump Starter for truck.bus, and boat with 24 diesel engine

T803D, Sbase's world first portable multifunction Li-Polymer Jump Starter for truck, bus and boat with 24V diesel engine. With 23100mah Li-Polymer Battery inside, T803D can generate peak power output up to 7500w. T803D's weight is only about 1kg and the size is 7*6*3 inch. T803D's self-power consumption is very low (below 0.1ma). With one full charge, it will still have over 95 percent power left inside after six month without using. This unique feature will ensure T803D can provide the power when you need. Built in Sbase patented large current protection system makes T803D safe to use. This unique protection system provides protections for short circuit, overload, over temperature, reverse connection, and reverse charging etc. T803D also provides multiple DC output such as 5V, 12V, 16V and 19V for most electronics. Built in LED torch and LED Array provides light and emergency signs for needed situations.

BSTFLEX Silica exhaust wrap

Silica exhaust wrap unlike fiberglass and titanium exhaust wraps (which should be advertised at a 1200°F operating temperature), our Silica exhaust wrap is made from silica yarn making this header wrap soft, strong, and flexible while operating at its designed operating temperature of 2000°F continuous, can withstand intermittent temperatures of 3000°F. .

Silica exhaust wrap is made from texturized amorphous silica filament yarn woven into a strong and flexible form. Because the yarn is texturized into a bulky form it provides excellent insulating values. Silica Exhaust Wrap is not made from leached fiberglass, resulting in a much more wear resistant finished product.

Silica exhaust wrap will sustain the extreme temperatures that your glowing pipes from the turbo, down pipe, header, manifold, or racing applications require.

See all exhaust wrap here
Titanium Exhaust Wrap - twill
Titanium Exhaust Wrap - Plain weave
Colored Fiberglass Exhaust Wrap

BSTFLEX Reflect Gold Heat Barrier

Reflect Gold Heat Barrier is a metalized polyamide polymer laminated glass cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. It is lightweight and easy to apply and remove.

Reflect Gold Heat Barrier is extremely light weight and capable of handling continual operating temperatures of 850 degrees F. Reflect Gold Heat Barrier offers considerable weight savings over similar types of materials yet still reflects 80 percent of radiant heat.

Highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms - anything or area that needs protection from heat.

Reflect Gold Heat Barrier Features:
For firewalls, bulkheads, engine covers, floors, seat bottoms & more
Capable of handling continual temperatures up to 850°F
Resists UV degradation for long-term performance
Virtually NO clearance needed
Adhesive protected by a release liner rated up to 325°F

BSTFLEX Battery Wrap Heat Barrier

Battery Wrap Heat Barrier reflects over 90% of radiant heat, traps and neutralizes battery acid, protects against corrosion, is recyclable, protects the environment, and is inexpensive and easy to install. Acid-absorbing battery pad included for complete protection.

It will also protect the battery from radiant heat, maximum Temperature 2000F (Radiant)

The Battery Wrap Heat Barrier is completely safe to handle before and during installation.

other thermal protection products please visit www.firesleevetec.com or www.bstbraidedsleeve.com, call 0086-15856303740, or e-mail: sales@bstbraidedsleeve.com

BSTFLEX Aluminized Woven Silica Textile Blanket

Aluminized Woven Silica Textile Blanket same high performance as our Woven Silica Fabric. Suitable for use at 1800°F (982°C) and able to withstand short term exposure up to 3000°F (1650°C).

Ideal for reflecting intense radiant heat, the aluminized heat-stable coating also provides additional tensile and tear strength, abrasion resistance and the ability to repel water and hydraulic oils.

Aluminized Woven Silica Textile Blanket is constructed from a 96% pure SiO2 silica fiber coated one side with an aluminized polyester film.

other thermal protection products please visit www.firesleevetec.com or www.bstbraidedsleeve.com, call 0086-15856303740, or e-mail: sales@bstbraidedsleeve.com

BSTFLEX Adhesive Backed Aluminum Coated Fiberglass Fabric

Adhesive Backed Aluminum Coated Fiberglass Fabric is an excellent method for reflecting unwanted heat from areas and surfaces needing protection.

Adhesive Backed Aluminum Coated Fiberglass Fabric is a heat reflective flexible sheet, constructed from a thin layer of aluminum foil which is heat stable laminated to a texturized glass fiber base fabric on one side, with a pressure sensitive acrylic adhesive on the other side to facilitate installation.

The durable construction of Adhesive Backed Aluminum Coated Fiberglass Fabric is suitable for demanding applications up to 400°F (204°C) continuous operating temperature. The glass fiber base fabric will stay intact up to 1000°F (538°C). Adhesive Backed Aluminum Coated Fiberglass Fabric is available in several sizes, with or without adhesive backing.

other thermal protection products please visit www.firesleevetec.com or www.bstbraidedsleeve.com, call 0086-15856303740, or e-mail: sales@bstbraidedsleeve.com

Syndicate content