Product

BSTFLEX Split Heat Protection Tube

This Removable Split Heat Protection Tube is made by fiberglass and aluminum.
The outside 2 layer is aluminum and it provide a good reflective, inside layer is fiberglass. This Removable Split Heat Protection Tube can be used to control cables, gear cables, cooling tubes, air conditioning and ventilation pipes, fuel hoses, wire sets and heat sensitive parts for Protection. This aluminum fiberglass corrugated tube also can be used on the copper pipes which are used for shifter cables, speed indicator cables, hydraulic systems, electrical cables and LPG systems for Protection purposes.

This tube’s Bending Radius is about 1.5 times of ID.

This Removable Split Heat Protection Tube can resistant -40°C--+350°C.

other thermal protection products please visit www.firesleevetec.com or www.bstbraidedsleeve.com, call 0086-15856303740, or e-mail: sales@bstbraidedsleeve.com

TrailBlaster™ Air Horn System for Jeep JK

Jeep JKs are some of the most popular off road vehicles on the planet. The only problem is that they’re light on room to accessorize them. When it comes to installing big, loud, nasty train horns – size almost always matters most. That is, until the TrailBlaster™ bolt-on dual air horn kit from Kleinn Air Horns arrived. Jeepers with this system constantly tell us that they can’t believe the amount of sound that comes out of their horns! The system uses a small-but-potent air compressor and a 0.66 gallon air tank, which are mated to a purpose-built, made in USA bracket that fits into factory locations in the rear chassis area of 2007-2014 Jeep JKs. The TrailBlaster™ requires no cutting, welding or drilling and is able to be installed using simple hand tools. The kit features a second bracket that is also made in the USA that allows our XCR2.0 corrosion-resistant Model 101 horns to be bolted to a factory location at the charcoal canister.

FORD FORWARD OBA SYSTEM:

New from Kleinn Air Horns is our forward-thinking, forward-installation, expandable Ford Onboard Air System for 2009-2014 Ford F-150 and F-150 Raptor. It is intended for all F-150 models except EcoBoost™. The system features a 100% duty cycle air compressor and 3-gallon, multi-port air tank. The system is expandable with an option for a second air compressor to double the system’s already quick tank refill rate. The system uses a custom 11-gauge steel, powder-coated bracket that is made in the USA, The system mounts securely between the front frame rails, and just in front of the radiator of the Ford F-150 using ¾-inch hardened steel bolts. Its compact design allows all parts of the system to exist in the same space, without using any cargo space whatsoever. Wiring for the system is simple, with an included custom-fit wiring harness that only requires a few basic connections. Installation time for this system is fast, at approximately one hour.

Chevy Chevy Shaker™ Bolt-on Train Horn System

P/N GMTRK-1

Kleinn Air Horns' HogKit-1 For Harley Davidson

HogKit-1 for Harley Davidson Motorcycles!

Kleinn Air Horns' Veloci-Raptor 220

Ford F-150 Dual Train Horn System
For 2009-2014 Ford F-150

Kleinn Air Horns' Veloci-Raptor 230

Ford F-150 Heavy Duty Triple Train Horn System Featuring The Beast™
For 2009-2014 Ford F-150

Kleinn Air Horns' Veloci-Raptor 730

Ford Super Heavy Duty Triple Train Horn System featuring The Demon™
For 2009-2014 Ford F-150 & Raptor (P/N VELO-730)

EXPLOSION PROOF ALUMINUM SANDING DUST VACUUM

State of the art, Pneumatic or Electric Vac systems are introduced by Arslan Automotive for the collection of Hazardous Aluminum Dust. Vacuums carry all necessary government approvals and Industry certifications,designed for use in Class I, Groups A,B,C,and D T6 and Class II, Division 1, Groups E,F,G Hazardous Locations as defined in the National Electric Code(NFPA 70)as well in compliance with applicable requirements ANSI/UL 1017 and CSA C22.2 No.243
GUARANTEED for the safe recovery of combustible/conductive dusts and/or flammable liquids.
Manufacturer with over 30 years experience and over 30,000 industrial installations now introducing the units to the automotive market for the recovery of Aluminum and non-hazardous sanding dust.

Dutch Company Innogoods enters the North American Aftermarket with its line of Automotive Interior Dehumidifiers

Hailing from Rotterdam in the Netherlands,Innogoods introduces its new Zarpax line,starting with a completely new industry category of re-usable automotive dehumidifiers which are designed to keep automotive interiors permanently dry.This category is becoming of increasing importance with the increase in on -board electronics,and electric vehicles,with their low tolerance to damp environments.
A Zarpax dehumidifying pouch placed on the dashboard overnight will prevent interior moisture which will stop the interior glass from misting up.Other benefits include the reduction of musty smells,mold and poor air quality in the interior,and corrosion of interior metal components .

Syndicate content